RCM01 Mic + Audio-Technica Boom Arm (Walnut) Bundle

Package Includes: (1) Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount (1) Audio Technica Boom Arm for USB Microphone Recording/Streaming Computer Mics All About your RCM01: Unboxing Video of RCM01: How to Setup a Rockville Condenser Microphone with Your Computer: How to Set Up A Twitch Stream with Rockville Equipment: Authorized Rockville Dealer: Description: The Rockville RMC01 condenser microphone performs better than famous branded microphones that cost over $100. Multi-Purpose Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM01 amazing in studio applications. The full metal construction makes the RCM01 tough enough for Live sound applications as well! Multiple connection options! This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer! Quality built inside and out! The microphone is made of all metal. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion! The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers. The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises. Best Value After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against. What's Included: RCM01 Condenser Microphone 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power Metal shock mount Anti-wind foam cap Warranty card Features: Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount RCM01 condenser microphone Full metal high quality construction Polar Pattern: Internally Polarized Condenser Cardioid Design Large diaphragm for smooth, natural sound and low noise Power Requirements: 48V DC Phantom Power Uni-directional Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ) Output impedance: 200O±30%(at 1kHz) Standard operating voltage: 3V Operating voltage range: 1.5V-10V Current consumption: less than 500uA Voltage deduction characteristic: within 3dB at 2V S/N ratio: More than 24dB Frequency Response: 30Hz - 20 KHz Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz Load impedance: Greater or = to 1000 Ohms Equivalent Noise level: Less than 18dB A (IEC581-5) Max. Input SPL: 126dB(THD=1.0% at 1kHZ) Electrical current: Greater than 4.8Ma Microphone body net weight: 325 Grams (0.72 Pounds) Microphone Max.diameter 48mm (1.89" inches) Microphone Length 157mm (6.18" inches) Microphone material: steel grille + Zinc alloy (handheld part) PCB Layout: Surface mount About Rockville Quality Control Procedures: The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty. Features: P11998 Adjustable Studio Boom Arm Full 360° rotation Extends 2.5 feet from the base of the boom arm Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick Included USB cable (Type B to Type A) extends 3 m (10') from the base of the boom arm High quality pre wired Audio Technica USB cable hardwired neatly into the boom arm so it is hidden If Boom arm is being used with a non-USB microphone cable can be cut and removed Internal cable management for clean desk appearance