RCM SR Mic + RG30 Pro Boom Arm Bundle

Package Includes: (1) Rockville RCM SR Studio/Recording Condenser Microphone Mic w/ Samsung Capacitors (1) Rockville RG30 ROGAN STAND 30" Pro Boom Arm Mic Stand w/ Fixed Mount+Desk Stand How to Setup a Rockville Condenser Microphone with Your Computer: How to set up your RCM-SR: Video of RCM SR: What's in the Box: (22 gauge, 10 feet) XLR to XLR Cable - To connect to the phantom power input on your mixer or interface (22 gauge, 10 feet) 3.5mm to XLR Cable - To connect the microphone to your computer Metal Shock Mount Large Wind-Screen/Pop-Filter Owner’s Manual Warranty Card Description: Introducing, the Rockville RCM SR, our newest high-quality, professional studio/recording condenser microphone! With it's large diaphragm it provides smooth, natural sound and low noise, it also delivers great bass, mids, and highs on all of your recordings. This microphone is very sensitive giving you the best possible sound! In addition, it includes a 25mm cartridge that allows for a bigger pickup area. The cartridge is the most important aspect that determines the sound quality, and the RCM SR has one of the best quality cartridges available for any microphone under $150. This microphone sounds better than other name brand microphones that cost twice as much! This microphone has two capacitors (22µ50V and 47µ16V). We use Samsung capacitors from Korea, which are the highest quality capacitors on the market. These are important to help stabilize the voltage so that your recordings are consistent throughout, even if there are sudden changes in the volume or frequency ranges. The body of the microphone is made of an aluminum metal. The super strong construction prevents noises from shocks and vibrations. This is especially important when recording loud music including drums and bass. The microphone head is made of strong, high quality steel and features a one-piece microphone head design. Most microphones will have a microphone head that is 2 pieces glued together. Our one-piece microphone head ensures longer life, and better durability. In addition, it helps to eliminate unwanted vibrations that may occur. We compared this microphone to the 3 most famous brands of microphones and the RCM SR outperformed similar microphones that sell for over double the price! Features: Rockville RCM SR Studio/Recording Condenser Microphone Mic w/ Samsung Capacitors Best Applications: Home-Studio, Recording Studio, Broadcasting, Podcasts, Live Performances, and much more! Large diaphragm for smooth, natural sound and low noise 25mm Large Cartridge - Allows For Bigger Pickup Area Two Large Capacitors: 22µ50V and 47µ16V Large Diaphragm - Provides Smooth Natural Sound, and Great Bass, Mids, & Highs High SPL Handling and Wide Dynamic Range Cardioid Polar Pattern Reduces Pickup of Sounds From Sides and Rear, Reducing Unwanted Noise Element: Fixed-charge back plate, permanently polarized condenser Microphone Head is Made of High Quality Steel featuring One-Piece Head Design Microphone Body Is Made of Special Zinc Metal Material - Prevents Noise From Shock and Vibrations Frequency Response: 20Hz - 20 kHz Open Circuit Sensitivity: -30dB ±2dB (0dB = 1V/Pa @ 1 kHz) Impedance: 100 Ohms Equivalent Noise Level: = 23 dB A (IEC581-5) Maximum Input Sound Level: 142dB SPL (THD = 1.0% @ 1 kHz) Noise: 20dB SPL Dynamic Range (Typical): 124 dB, 1 kHz @ Max SPL Signal-to-Noise Ratio: 74 dB, 1 kHz @ 1 Pa PCB Layout: Surface Mount Fixed Crossover Filter Cutoff Frequency: 50Hz - 16 kHz Power Requirements: 48V DC Phantom Power Output Connector: 3-Pin XLR Product Weight: 0.74 Lbs Product Height: 7.44" inches Shipping Weight: 3.32 Lbs Shipping Dimensions: 13.98" x 7.87" x 3.15" All About Your RG30: How To Set Up Your RG30: How To Set Up Your a Dynamic and Condenser Microphone to your RG30: How To Set Up a Smartphone or Tablet to your RG30: What's in the Box: Boom arm stand Allen key 2" long M8 screw (for desk surface-mounting) 4" long M8 screw (for desk surface-mounting thicker desks) C-Clamp for desk clamping Fixed mounting plate to mount it into your desk (comes pre-instal to the C-clamp, see our video for how to install) Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand Mic clip Description: Why is this better than others? Our model includes a high-quality C-clamp so you can mount the stand to the side or the back of a table or desk. But what really sets our item aside is that we also give you the ability to mount this to the top of the desk for a cleaner installation. This enables you to mount the boom arm in the most optimal location on your desk. We eliminate clutter by including a cable that is fixed inside of the boom arm and completely hidden. If you need to replace the cable you can easily replace it. Our boom arm has a great telescoping mechanism that makes it easy to adjust yet it will firmly stay in place. The look of this is very professional and clean. There are no springs or other eye-sores. Our boom arm completely folds in half if you need to travel with it. We build our model out of Aluminum which costs more than steel. What makes this great is it will never rust and it is more light-weight and higher quality. We include all the screws and cables, mic clip, and installation video for installing it on the top of your desk. Features: Rockville RG30 ROGAN STAND 30” Inch Pro Boom Arm Mic Stand Includes XLR cable built into the stand that is hidden inside the stand for a clean look Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism Easily Mounts to the top of a desk (See our install video) Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3" inches thick) This is made out of aluminum which is rust-free and lighter weight Arm length: 14" + 14" Position is completely adjustable Firmly stays in place once you adjust it There is a safety locking pin for the arm to lock in place (other similar stands do not have this) Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this) Standard 5/8" Mic Threads for Connecting Most Podcast and Vocal Microphones Suitable for studios, broadcasting, podcasting, and more