RCMaker Damper O-Ring Tool V1/V2 for AMX

Who wants to make building their dampers a breeze?! Introducing our latest evolution of the ever popular Damper O-ring Tool for the Awesomatix range of cars.  With the positioning of the P63 Piston inside the damper vane being critical to the smoothness and longevity of the damper, we decided to make the process a whole lot easier! Our Damper O-ring Tool V2 features the helpful o-ring seating and oil removing features of before, but now with an extra stick that inserts into the centre of the damper and when pressed down together with the main o-ring, seats the P63 in the optimal position whilst seating the oring. Simple push the oring down and the excess oil will bleed out around the two contact patches of the tool on the oring, keep rotating the tool around to seat the oring all the way around its perimeter. No back and forward o-ring, then P63 positioning, no paper clips or drawing on wrenches. A simple, all in one tool. Simply push down and seat the o-ring, and at the same time the piston position will automatically be set once the o-ring is seated flat. Then spin the tool and you can remove excess oil from both on top of the o-ring, and inside the centre damper cavity above the P63 Piston. Insert the main bearing and you're done!  The Damper O-ring Tool V2 will work with both normal damper caps, and ADC to give you the perfect build, every time! Features: Seats main o-ring with automatic positioning of P63 Piston Upon seating can be used to clean excess oil out of outer and inner cavity CNC machined and 100% manufactured in Australia from high quality carbon fibre