AutoMeter RC-300PR Technician Grade Handheld RC-300 Tester with PR-20 Printer

AutoMeter RC-300PR Technician Grade Handheld RC-300 Tester with PR-20 Printer     The RC-300PR is a portable, fully featured tester that provides quick and accurate results utilizing AutoMeter's Award Winning "Digital Pulse Load" technology. The RC-300PR is user friendly, instructing the user exactly what to do while testing an SLA battery. Professionally accurate test results are shown on a LCD display after each test and can be shared with a customer using the included bolt-on printer (PR-20). The RC-300PR has a built in memory so you can easily review and/or print test results.     Kit includes AutoMeter PR-20 add-on thermal paper printer specifically designed to enhance AutoMeter Electrical System Testers by providing instant hard copy results and credibility. Additional added value in package savings when purchasing kit. Features - Tests SLA , Flooded, Gel Cell, or AGM batteries. Also tests discharged batteries and detects bad cells. - Applies a true 40 amp load during testing to simulate real world operating conditions and provide more accurate test results. - Tests 6V and 12V batteries rated between 4AH - 50AH. - Stores the last 50 tests in memory. - The RC-300 enables the user to "blue print" known good batteries of different types/sizes to drive improved testing accuracy. The unit will store up to 40 different "blue printed" battery types. The user can also set customized pass/fail settings. - Test results include: battery's measured amp hour (AH) capacity, battery voltage and percent of charge, and what the battery's state of health is (good, near end of life, or bad). - 30" - 16 gauge leads. - Customer communication with optional PR-12 (external printer), PR-20 (bolt-on printer), or AC-12 (PC cable). - Tough impact resistant plastic housing with easy grip rubber boot that prevents damage to the unit. RC-300 Specifications - Load Test Capacity: 40 Amp - Battery Sizes: 4.0 – 50 Amp Hours - Digital Display: 1" x 2.5" - 4 line x 16 character - Volt Ranges: Digital 0-30 - Cooling: Heat Sink Ventilation - Leads: Load Amp-2 1/2 ft., 16 Gauge - Dimensions: 3 3/4" x 6 3/4" x 1" - Weight: 1.34 lbs. - Memory: Stores the last 100 tests - Internal Battery: 9 Volt Alkaline PR-20 Printer Information AutoMeter PR-20 Add-On Thermal Printer for All AutoMeter Portable Hand-Held Testers   The PR-20 is an add-on thermal paper printer for all AutoMeter portable handheld testers. The PR-20 attaches directly to the tester and features a protective boot for long service life.    - Add on thermal paper printer for all AutoMeter portable handheld testers. - Attaches directly over the tester and is held in place by a rubber protective boot. - Easy drop in paper replacement - uses standard 58mm thermal paper. - Runs on a 7.4 V Li-Ion camcorder rechargeable battery (AC-113) (Typical battery life: 6000 print lines - 2 hour recharge time) - Includes battery charger and battery charges while installed in unit.    Weight: 2 lbs Warranty: 12 Months Optional Accessories - PR-12 Infrared Printer - AC-12 PC Interface Adapter Cord - AC-24J Carrying Case only - AC-32 Serial Port to USB Adapter - AC-62 AMP Link Data Download PC Software Information Downloads RC-300 Operator Manual PR-20 Printer Operator Manual