Rapid Cure Screen Printing Puff Additive

Key Benefits:  Plastisol ink additive that creates a puff effect Raised effect while keeping sharp edges and detail High opacity prints  To be used with Low Cure Plastisol Inks  Prints on cotton, polyester, and poly blends  Cures at 270° Fahrenheit Gels around 220° Fahrenheit Please note: Puff Additive will lighten the color of the ink dramatically. Please see the before and after images for example. Rapid Cure Screen Printing Puff Additive by Screen Print Direct® is a low-temperature cure plastisol ink additive formulated to give your ink an elevated puff texture. Rapid Cure Puff Additive is ready to use from the container, mix the additive into the ink of your choice. The puffing effect occurs once the ink is fully cured on your garment. We highly recommend using Rapid Cure Puff Ink with low-temperature ink. Results with a standard plastisol ink are subpar. Directions: Add 10 – 20% by weight to the ink of your choice and mix.                 Ex. 50 grams of ink requires 5-10 grams of Rapid Cure Puff Additive. Cure at 270º Fahrenheit. Recommended Mesh Count: 40 - 110 Mesh (40 mesh for maximum puff effect) Cleans Up: Ecotex® Screen Printing Plastisol Press Wash/Ink Degradant Recommended Storage: 65º - 90º Fahrenheit Warning: This product can expose you to chemicals including n-hexane, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov Click Here for Safety Data Sheet