Rammy UTV Snowblower 155 PRO

Clear snow quickly and easily with the Rammy UTV Snowblower 155 PRO!  The Rammy UTV Snowblower 155 PRO has the same great features as the Rammy Snowblower 120, but uses add-on wings to achieve an overall width of 61 inches.  Additionally, the UTV version of the Rammy Snowblower includes a shorter “one-pipe” subframe that is ideal for front mounting onto most UTV applications.  **If you require the 2 pipe subframe – order the ATV version and choose the optional wings as desired**  The Rammy UTV Snowblower 155 is an agile and efficient attachment that is easy to install, use, and maintain. Manufactured in Finland with top quality components, Rammy is a Pioneer in high quality, functional ATV / UTV attachments.   The UTV Snowblower 155 PRO includes a universally adjustable “1-pipe” subframe (that is shorter than the ATV snowblower subframe) and will attach to almost any snowplow mount bracket, as long as that bracket utilizes 10mm / 3/8″ pins to attach.  This subframe is adjustable telescopically in and out, and it has adjustable L bracket ears to fit most plow mounts.  This subframe then bolts onto the Rammy attachment.  If your machine has 16mm, 19mm, or 20mm mounting posts, you can add the optional Rammy Lock / Hook Set for easy attachment. Important Notes A universal or model specific snowplow mount bracket is required to attach the Rammy to your machine.  If you already have a snow plow bracket installed, the Rammy may attach right to it!  The subframe (or push tube) is included with the Rammy, but the mount bracket is not.  We do not sell mount brackets, but have had good success using KFI Products vehicle-specific snow plow mount brackets. A winch is required to raise and lower the Rammy.  You will require a vehicle specific winch, so we recommend working with the nearest dealer for your brand of ATV / UTV for the best solution. Rammy attachments add a substantial amount of weight to the front of your ATV / UTV (see tech specs).  We recommend at the minimum a 570CC ATV / UTV to use with a Rammy – but all ATV’s / UTV’s vary.  Make sure that your front suspension is strong enough to handle the additional weight of a Rammy.  We also recommend using about 100lb of ballast weight on the rear of your ATV / UTV to help keep things level.  For best results, we recommend installing the subframe onto your ATV / UTV first, then bolt the Rammy to the subframe while both the vehicle, and the Rammy are on the same level surface. Installation   After your initial installation and setup with the subframe, detaching and reattaching the Rammy is done in a matter of minutes!  This means that your UTV can easily be used for other activities quickly and easily when you are not using the Rammy.  The Rammy UTV Snowblower 155 PRO is loaded with features that make it powerful, efficient, and user friendly! Briggs and Stratton 420cc Professional Series engine 21.00 ft/lb gross torque Certified to start at -20* fahrenheit 120 volt plug-in electric start (using standard 3 prong extension cord) Grease fittings on the main auger bearings Rammy MDS system No shear pins to break! No gearbox to maintain! Throws snow 3-30 feet! Adjustable height skid shoes Replaceable metal scraper bar Flip-down chute door for easy clean out if needed Included wired remote control box powered by the engine! Left / right chute control Up / down deflector control On / off engine switch (kill switch) 2 year warranty on Rammy machine – *Does not include belts, skid shoes, or bearings 2 year warranty on Briggs & Stratton engine – *Does not include fuel related issues Whether you need to keep your own driveway clear, or clear snow at multiple properties, the Rammy Snowblower 120 PRO is a versatile attachment that is easy to install, use, and maintain.  Invest in a high-quality, made in Finland ATV attachment that is backed by Wolfe Ridge in North America! Tech Specs Briggs & Stratton 420cc 21.00 ft/lb torque gas engine Recoil pull start AND 120 volt plug in electric start Belt driven – 2x matched belt set pair 47.25″ overall width with wings removed 46.50″ clearing width with wings removed 3-30′ snow blowing distance 155 wing set standard – brings overall width to 61 inches 140 wing set optional – brings overall width to 55 inches Optional quick adjust skid shoes available Universal adjustable 1-pipe subframe (pushtube) included for front mounting Adjustable telescopically: 19.6 inch – 32.6 inch overall length Adjustable width between mounting ears: 9.4 inch – 19.6 inch Snowblower weight: 260 LB (with 155 wings) Subframe weight: 45 LB Total attachment weight (Snowblower + Subframe): 305 LB Find a Rammy Dealer Near You Rammy dealers are well-versed in the machines, and how all of the mounting systems work.  These dealers also offer installation of the Rammy products – for an additional service fee.  This fee varies depending on your machine, and whether or not you would need additional parts, such as a winch or mount bracket, in order to install the machine.  Please visit our North American Rammy dealer locator HERE. Shipping Rammy machines ship via LTL, on a pallet.  If a semi truck can get to your address, we can arrange a shipment with liftgate service.  Freight price is usually between $500-$800 in the US, and a bit higher in Canada.  For a freight quote, please fill out the form at the bottom of this page with your full ship-to address.  To save some freight, and possibly lead time, we recommend contacting the Rammy dealer closest to you.  Please visit our North American Rammy dealer locator HERE. **IMPORTANT SHIPPING NOTES** If you order a machine and do not opt for liftgate service, you will need a forklift or skid steer / loader / tractor with forks for unloading.  These machines are not able to be unloaded by hand! If you order liftgate service, the truck will unload your machine at the end of your driveway closest to the road.  Semi truck / trailers will not typically drive on residential driveways so please keep this in mind. We can also offer “terminal pickup” for your machine, so you would go to the nearest freight terminal to pick it up.  In that case, the shipping company would load your crated machine onto a trailer on into the bed of your truck.  Note that the crate size is 48″L x 32″W x 42″H. Video   Questions? Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Name *FirstLastPhoneEmail *Message *View our Privacy PolicySend