Raise3D Industrial PET CF Filament 2.5 kg - RFID

Need accessories to go with your 3d printer? Check our Top 6 Essential 3D Printer Accessories. Raise3D Industrial PET CF Filament 2.5 kg - RFID Color: Black (PMS: Black 6 C/RAL 7016) Specifications: 1.75 mm/ 2.5 kg Raise3D Industrial PET CF is a carbon fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed 15wt% carbon fibers enhance the rigidity, strength, heat and chemical resistance of the PET matrix. After annealing, PET CF stabilizes its heat resistance at around 150ºC and tensile modulus and strength of over 6 GPa and 80 MPa respectively. Compared to carbon fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance and low moisture absorption makes PET CF an ideal choice for reliable carbon fiber composite printing for strong and cost-effective end-use applications, such as jigs. fixtures, functional parts.   About the RFID version filament This version comes with an RFID tag. When printed on the Pro3 HS Series 3D printers, the Pro3 HS Series RFID filament sensor can identify the filament type and verify the print parameters. However, this type of RFID-enabled filament can also be used on other compatible Raise3D 3D printers, even if the printer is not equipped with an RFID sensor.   2.5 kg filament allows for uninterrupted batch printing and continuous printing for large models. It is provided inside a sealed dry storage bag, and the filament outlet and shaft ensure the printer smoothly loads the filament while also keeping the filament dry. Users can install the 2.5 kg filament directly inside the Raise3D RMF500 filaments cartridges. For instructions on how to unpack and load this filament, please refer to the How to Unpack the 2.5 kg Filament Bag Manual. Benefits of 2.5 kg Filament: Uninterrupted long-term batch printing Continuous printing for large models Simplified operation with less filament change Filament bag keeps the filament dry This filament is compatible with Raise3D Industrial PET Support Filament. *Due to the higher carbon fiber content of PET filaments, when printing PET CF, an extra wear-resistant nozzle and extrusion system are required for a consistent printing performance. The RMF500 are specially designed for printing high-performance fiber-reinforced composite filaments. As such, it is recommended to use the Raise3D Industrial PET CF filament exclusively on the RMF500. Technical Data Sheet Safety Data Sheet RoHS – Certificate of Compliance Raise3D-Filament Compliance With Reach How to Import Slicing Profile to ideaMaker Free ground shipping within continental United States on orders over $90. For delivery of the USA, expedited delivery availability (additional cost may apply), or additional questions, please contact sales@raise3d.com or 1-888-963-9028. The shown price excludes tax, which will be calculated during check out.