Rainbow Trout Pattern Wyoming State Shape Iron-On Patch

Rep your favorite Wyoming trout with this rainbow trout pattern Wyoming shaped woven patch! Put it on your fishing pack, jacket, your backpack, your own hat with an iron or heat press! Deets: Patch comes with heat seal baking for iron on or heat press application (can also be sewn on). Woven patch is highly detailed! Dimensions approx. 3" X 2.3". (please note: this is not an exact rectangle or square but this is the actual shape of Wyoming!!) ABOUT THE RAINBOW TROUT: The Rainbow (Oncorhynchus mykiss) is a trout and species of salmonid native to cold-water tributaries of the Pacific Ocean in Asia and North America. They are native to the Western U.S. and were introduced to Wyoming in the late 1800's.  Rainbow trout are gorgeous fish with colors and patterns that vary widely depending on habitat and age. They are generally identified by a reddish pink stripe running along the sides of the fish, greenish olive backs and silver/gray bellies with black spots on their back and fins. This unique and hand made bracelet showcases these beautiful colors and spots of the rainbow trout. Application Instructions: Basic DIY at home instructions. 1. Set the iron to “cotton” or “high heat” on the temperature setting. 2. Lay the garment flat (on an ironing board). 3. Preheat the garment where the patch will be attached. You should protect your garment by putting an inexpensive cloth, sheet, or pillowcase between the iron and the garment. Then, press the heated iron firmly down on top of that cloth for 10 seconds. 4. Place the patch on the pre-heated spot. Put the cloth, sheet or pillowcase on top of the embroidered part of the patch so you don’t burn the embroidery thread. Press firmly on the iron for 15-20 seconds. 5. If possible, repeat this step through the reverse side of the garment. Be sure to use your thin cloth, sheet or pillowcase so you don’t burn the garment. 6. This is important: Your glue will be hot and liquified but it will cool fast and harden soon. Be very careful to not let the patch move around on the garment before the glue hardens. If it moves around, the bond will not be as secure. 7. Set your garment aside and let it cool back down to room temperature.