RAIN PREP Glass Activator & Cleaner 7:1

As a component of AUTOSCRUB, NANOSKIN RAIN PREP cleanses and lubricates the glass so well while gliding the AUTOSCRUB back and forth. RAIN PREP removes fingerprints, dust, grime, bugs, and buildup, restoring the brilliance of crystal clear finish. RAIN PREP also opens the pores of the glass and is a perfect first step set up for NANOSKIN RAIN Glass Sealant application. NOTE: Due to its ammonia formula, avoid contact with plastic molding and trims. DO NOT use on interior tinted glass. DIRECTIONS for use Directions: AUTOSCRUB • Remove loose dirt on the glass. • Dilute RAIN PREP to desired strength. • Mist sufficient RAIN PREP onto the surface evenly. • Polish the surface with AUTOSCRUB Decontamination product. • Wipe off residue and apply RAIN Glass Sealant. NOTE: Sufficient lubrication is crucial to the AUTOSCRUB application. Plain water is NOT an adequate lubricant. Glass Cleaner • Dilute with water to designed strength. • Spray or wipe on surface. • Wipe with a clean dry towel or glass towel for a sparkling clean surface. TIPS: All glass cleaners are sensitive to dirty towels. So, if you use a towel that's previously been used for polishing or waxing, remaining product residue is bound to leach out and smear your glass. Dedicated glass towels are your best bet. Step 1: Spray a generous amount of Rain Prep on glass surface. Step 2: With light to medium pressure slide the Autoscrub across the glass surface in a back and forth motion Step 3: Wipe glass surface clean of residual Rain Prep Step 4: Apply Rain glass sealant on previously prepared Rain Prep glass surface Step 5: Wipe glass surface clean of residual Rain glass sealant. TechnicalInfo Contains: Water (CAS#7732-18-5), Isopropyl Alcohol (CAS#67-63-0), Ethanol (CAS#64-17-5), Propylene Glycol n-butyl Ether (CAS#5131-66-8), Polyethylene Glycol (CAS#25322-68-3), Aqua Ammonia (CAS#1336-21-6) As a component of AUTOSCRUB, NANOSKIN RAIN PREP cleanses and lubricates the glass so well while gliding the AUTOSCRUB back and forth. RAIN PREP removes fingerprints, dust, grime, bugs, and buildup, restoring the brilliance of crystal clear finish. RAIN PREP also opens the pores of the glass and is a perfect first step set up for NANOSKIN RAIN Glass Sealant application. NOTE: Due to its ammonia formula, avoid contact with plastic molding and trims. DO NOT use on interior tinted glass. DIRECTIONS for use Directions: AUTOSCRUB • Remove loose dirt on the glass. • Dilute RAIN PREP to desired strength. • Mist sufficient RAIN PREP onto the surface evenly. • Polish the surface with AUTOSCRUB Decontamination product. • Wipe off residue and apply RAIN Glass Sealant. NOTE: Sufficient lubrication is crucial to the AUTOSCRUB application. Plain water is NOT an adequate lubricant. Glass Cleaner • Dilute with water to designed strength. • Spray or wipe on surface. • Wipe with a clean dry towel or glass towel for a sparkling clean surface. TIPS: All glass cleaners are sensitive to dirty towels. So, if you use a towel that's previously been used for polishing or waxing, remaining product residue is bound to leach out and smear your glass. Dedicated glass towels are your best bet. Step 1: Spray a generous amount of Rain Prep on glass surface. Step 2: With light to medium pressure slide the Autoscrub across the glass surface in a back and forth motion Step 3: Wipe glass surface clean of residual Rain Prep Step 4: Apply Rain glass sealant on previously prepared Rain Prep glass surface Step 5: Wipe glass surface clean of residual Rain glass sealant. TechnicalInfo Contains: Water (CAS#7732-18-5), Isopropyl Alcohol (CAS#67-63-0), Ethanol (CAS#64-17-5), Propylene Glycol n-butyl Ether (CAS#5131-66-8), Polyethylene Glycol (CAS#25322-68-3), Aqua Ammonia (CAS#1336-21-6)