Rain Mitt "Forest Mushroom"

Items made to order | Check home page for build time and shipping estimates Based in Philly | Est. 2018 What Your Purchase Supports: This series is an artist collaboration.  The artist collects 15% of the proceeds from the sale of their designs, keeping them hard at work doing what they love!  Support independent art! Garage Grown Gear review here. Perfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.            *Due to dye-sublimation, colors may vary slightly.      Designed, printed and sewn in Philadelphia, PA  Care Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.         Hand wash with a gentle soap.           Do not iron.           Do not wring.           Drip-dry in shade.         Do not bleach.      Specs:     Dimensions:         Sm/Md: ~ 11.4" x 7.4"         Lg/Xl: ~ 12.2" x 7.5"     Sizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm/Md size will fit most people with a base measurement of 6.5" - 7.75". A Lg/Xl size will fit most people with a base measurement of 7.5" - 8.25".     Weight:           Sm/Md: 1.07 oz / 30 grams         Lg/Xl: 1.21 oz / 34 grams              Materials:         Sublimated 3.3 oz/sqyd Challenge Sailcloth TX95         Sublimated 1.43 oz/sqyd Dyneema Composite Fabric         3M 9471 LSE Dyneema Tape         1/8" Shock Cord         1/2" Firm Nylon Grosgrain Ribbon         2 mm Black Spectra Glove Pull         Cord Toggle         Cord Pull              Features:         Extremely Water-Resistant (as close to waterproof as you can get without welding)         Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)         One-handed wrist cinch fastener to tighten/loosen each mitt         Fully-Taped Seams         Large glove pull on each mitt for ease of donning         Shock cord wrist cinch to prevent water ingress         Loops for attaching mitten hooks         Unique Colorways         Ultralight Construction