Rain Gutter Mount - Extra Tall 1030 Extrusion Assembly (Single)

Complete Extra Tall Rain Gutter Mount Assembly With A 1030 Extrusion Specific Mounting Plate (Single Unit). These Are A Universal Adjustable Mount That Can Be Used For Mounting 1030 Aluminum Extruded Tracks To A Standard Automotive Rain Gutter. The Mount Allows Vertical Adjustment In Height From Mounting Surface Through The Two M8 Socket Cap Bolts On The Mount Face. Width Adjustment Can Be Made Through The Three Bolt Slots On The Upper Mount Assembly. These Mounts Are Made From Both .06" (1.50mm) Stainless Steel & 3/16" (4.78mm) 5052 Aluminum For Superior Strength And Corrosion Resistance* In All Working Environments. Options In The Drop Down Menu Allow You To Choose The Mount Finish.  Each Unit Contains The Following: (1) Rain Gutter Extra Tall Upright (1) Rain Gutter Clamp (1) Rain Gutter Spacer (1) 1030 Extrusion 7.5" (19cm) Length Mounting Plate (2) M8 Socket Cap Bolts, (2) M8 Carriage Bolts, (6) Washers, & (4) Nuts (3) 1/4-20 Stainless Track Nuts, (3) 1/4-20 Stainless Socket Bolt, (3) Washers Rubber Isolator For Resting Against Rain Gutter Valley Foam Pad For Clamp Resting Against Underside Of Rain Gutter Optional Selections FINISH Textured Black - A Durable Fine Textured Black Powdercoat Finish Raw - Raw Aluminum Finish With No Surface Prep *Corrosion Resistance Is Only Achieved Through A Post Applied Finish On The Raw Aluminum Components (I.E - Powdercoat Or Anodizing). Raw Finish Will Not Provide ANY Corrosion Resistance And MUST Be Coated Before Installation.