Radial Duplex Direct Box

The Radial JDI Duplex is a full-feature, stereo passive direct box designed to enhance connectivity, reduce noise, and simplify the hectic life of the touring professional, broadcast engineer or AV integrator. It is plug-and-play easy to use while delivering the utmost sonic quality. Like the Radial JDI, the Duplex employs two high-performance 'made in the USA' audio transformers and the same pristine audio signal path that has made the JDI the industry standard. It features exceptional signal handling with virtually zero phase shift or harmonic distortion, while remaining linear across the entire audio spectrum. When driven to extremes, the natural transformer saturation and resulting warm Bessel curve makes the Radial Duplex the perfect choice for smoothing out highly dynamic instruments such as digital pianos and electronic drums that can sound harsh when pushed. Transformer isolation provides the additional benefit of eliminating troublesome ground loops that can cause hum and buzz in the audio system or interfere with video displays. This 'Swiss Army knife' DI is equipped with ¼' connectors for instruments, RCA connectors for unbalanced -10dB consumer electronics and XLR inputs for +4dB professional line sources. Radial's innovative book-end design provides protective zones on the front and rear to keep connectors and switches out of harm's way. The 14 gauge I-beam inner frame adds tremendous rigidity to eliminate outside stresses that could torque the PC board and cause premature solder joint and trace failure. The steel outer shell couples with the transformer's mu-metal shield to protect against stray magnetic fields from power transformers or lighting systems that could cause interference. Finally, a full-bottom no-slip pad works double-duty by providing both mechanical and electrical isolation. The Radial Duplex delivers outstanding connectivity, superlative audio and quiet dependable performance. The Duplex… the world's finest passive stereo direct box. Features SpecificationsContents Stereo direct box for high-output digital sources Virtually zero distortion from 10Hz to 80kHz Stereo-to-mono merge (Y-mix) on each channel Built tough to handle the extremes Circuit type Passive transformer based Dynamic range 135 dB Signal to noise 119 dB 180° polarity reverse Inverts absolute phase Connectors 1/4" in & thru, RCA in, XLR-F in, XLR-M out MERGE Sums left & right sources to mono Input Pad -15dB XLR input +4dB balanced Finish Baked enamel Transformers Eclipse ET-DB1, 12:1 ratio Ground Lift LIFT switch - XLR outs pin-1 Construction 14 gauge steel chassis and outer shell, baked enamel finish Size 6.25"w x 5.0"d x 1.875"h (159 x 127 x 48mm) Weight 2.9 lb (1.32 kg) Number of channels Dual channel (stereo) Frequency response 20Hz ~ 20KHz (± 0.2dB) Maximum input +21dB @ 20Hz Total harmonic distortion 0.05% from 20Hz ~ 20kHz @-10dB Phase deviation 0.3° @ 100Hz; 3° @ 20Hz Input impedance 140k Ohms, unbalanced Output impedance 150 Ohms, balanced Shield Dual Faraday, mu-metal can XLR configuration AES standard (pin-2 hot) Power Passive, no power required (1) Radial Engineering JDI Duplex Mk4 Stereo Passive Direct Box