R1WURKS Digital Pro ESC

R1WURKS Digital Pro ESC Whether you're a Modified or Spec racer looking for power, efficiency, and complete adjustability, the new no-compromise R1WURKS Digital Pro ESC gives you the precision and control to fine-tune your setup and get the most out of your car. Featuring the latest CPU architecture and a newly engineered circuit board, the ESC delivers fast, precise control for high-performance 1/10 scale RC racing applications. Designed for 540-size sensored brushless motors used in both Spec and Modified racing, the ESC delivers an impressive 760A peak current and 200A continuous current, while the integrated 7A BEC provides selectable 6V or 7V output for your receiver and servos. Easy Adjustability and Tuning: Wireless programming and setup are available through the optional R1WURKS Bluetooth module, with support for compatible Android and iOS devices. Compatibility Notice: The Digital Pro ESC runs on its own dedicated platform and is not compatible with the Digital 3 system or the Digital 3 WiFi module. KEY FEATURES 32-bit processor for ultrafast, precise ESC control Latest CPU architecture and newly developed circuit board for enhanced performance and efficiency.  760A peak current capability 200A continuous current capability Low internal-resistance MOSFET configuration optimized for spec racing applications. Bluetooth app-programmable with optional Bluetooth module Supports 6.0–9V input voltage Designed for 540-size sensored brushless motors Motor limit: 4.5 turns and higher Built-in 7A BEC Pre-installed 12 AWG black wires and power capacitor. Selectable 6V / 7V BEC output Removable power switch  Lightweight 40g design, ESC only w/o fan Compact design: Width: 31mm Length: 35.6mm footprint / 41.5mm including solder posts Height: 17mm without fan / 27.3mm with fan R1WURKS Firmware ver1.01Release: https://cdn.shopify.com/s/files/1/1593/0345/files/R1WURKS_Firmware_ver1.01Release.bin?v=1790281561 Download the APP here: https://apps.apple.com/us/app/digital-pro-r1wurks/id6806111763 Download the Manual here: https://cdn.shopify.com/s/files/1/1593/0345/files/R1Wurks_Digital_Pro_ESC_Long_Page_Manual.pdf?v=1790806547 What’s in the Box! Digital Pro ESC Power capacitor (pre-wired) Switch-delete jumper plug (installed) On/Off switch ESC fan (30×30×10.3mm) 4× fan mounting screws M2.5 × 12mm button head (1.5mm hex) Optional Wireless Programming Module available HERE R1WURKS 90-DAY LIMITED WARRANTY IMPORTANT: BY USING YOUR R1WURKS MOTOR, ESC, BATTERY, FAN, TOOL, OR R1WURKS-BRANDED ACCESSORY (THE “PRODUCT”), YOU AGREE TO THE TERMS OF THIS 90-DAY LIMITED WARRANTY (“WARRANTY”). PLEASE READ THIS WARRANTY BEFORE USE. IF YOU DO NOT AGREE TO THESE TERMS, DO NOT USE THE PRODUCT AND RETURN IT WITHIN THE APPLICABLE RETURN PERIOD UNDER THE R1WURKS RETURN POLICY. 1. WARRANTY COVERAGE R1 Brushless Motor Lab, LLC (“R1WURKS”), located in Laguna Niguel, California 92677, warrants that R1WURKS Products will be free from defects in materials and workmanship under normal use and in accordance with R1WURKS's published instructions and specifications for 90 days from the date of original retail purchase by the end user (“Warranty Period”). This Warranty gives you specific legal rights. You may have additional rights under applicable federal, state, provincial, or local law. Nothing in this Warranty is intended to limit rights that cannot legally be limited or excluded. 2. WHAT IS NOT COVERED This Warranty does not cover: Normal wear and tear or normal aging; Consumable items, except where failure results from a manufacturing defect; Cosmetic damage such as scratches, dents, or discoloration; Damage caused by accidents, crashes, abuse, misuse, neglect, fire, liquid, electrical events, or other external causes; Damage resulting from improper installation, operation, maintenance, or use outside R1WURKS specifications or instructions; Damage caused by incompatible or defective third-party components; Damage resulting from unauthorized repair, modification, disassembly, upgrades, or alterations; Products with removed, altered, or unreadable serial numbers; or Products reported stolen or where lawful ownership cannot reasonably be established. Do not open or disassemble your R1WURKS Product unless specifically authorized by R1WURKS. Damage caused by unauthorized disassembly may not be covered by this Warranty. 3. WHAT R1WURKS WILL DO If a Product has a defect covered by this Warranty and a valid claim is submitted during the Warranty Period, R1WURKS will, at its option and subject to applicable law: Repair the Product; Replace the Product with the same or a substantially similar Product; or Refund the original purchase price. Replacement Products or parts will be covered for the remainder of the original Warranty Period, unless otherwise required by law. 4. HOW TO MAKE A WARRANTY CLAIM Before requesting service, review the applicable R1WURKS troubleshooting and product-support information. If the Product remains defective, contact R1WURKS or an authorized R1WURKS distributor. You may be required to provide proof of purchase, the Product model and serial number, photographs or video of the issue, and a description of how the Product was installed and used. If R1WURKS approves the claim, you will receive instructions for returning or servicing the Product. R1WURKS may provide service by mail, replacement parts, or another method it determines appropriate. Service options and availability may vary by location. Shipping, customs, taxes, and other charges may apply where permitted by law. 5. LIMITATION OF LIABILITY To the maximum extent permitted by law, R1WURKS will not be liable for indirect, incidental, special, or consequential damages, including loss of use, profits, revenue, business, goodwill, data, or other indirect losses arising from the product or this warranty. Nothing in this warranty limits liability that cannot legally be limited or excluded. Some jurisdictions do not allow certain warranty or liability limitations, so some of these limitations may not apply to you. 6. GENERAL No R1WURKS reseller, distributor, employee, or agent may modify this Warranty unless authorized by R1WURKS in writing. If any provision of this Warranty is found unenforceable, the remaining provisions will remain in effect. This Warranty is governed by applicable law in the jurisdiction where the Product was originally purchased, except where otherwise required by law. R1 Brushless Motor Lab, LLC 28241 Crown Valley Parkway, #F503 Laguna Niguel, CA 92677 USA R1WURKS.com © 2026 R1 Brushless Motor Lab, LLC. All rights reserved.