Bikepacking-Optimized Bear Spray Holster - Quick Release

The BearclawHolster™ With BearGrip EZ-Mount Kit  includes a Bearclawholster of your choice plus a BearGrip EZ-Mount Kit. (below) Designed with rider input, the mounting kit includes a TPU anti-slip frame gasket and two NinjaFlex D-80 stretch straps. Custom produced to retain the BearClawHolster, this strap kit allows you to mount your BearClaw holster to areas of your bike with no waterbottle bosses--like your fork, your top tube, and your down tube. The straps have a maximum diameter extension of 7 inches and the whole kit weighs only 20g. If you love your bearspray close when you're in the back country, but want to quickly remove it to ride into town and get some coffee, this is your jam. It's also quite useful if you use the same bike for training (bearclawholster on) and racing (bearclawhoster off). Back country tested--and several are in-use in this year's Tour Divide. The BearClawHolster and BearGrip EZ Mount Kit are individually 3d printed by BearClaw in Whitefish Montana, a special place where the residents know a thing or two about really big bears. Designed out of necessity!  This is the one and only bicycle-specific bear spray holster design. If you're familiar with the sprays, you understand the funky fabric "belt loop" style holsters that sell with them, none of which is especially conducive to backcountry riding. Every rider has their own work around and none of them are any good. If they were, you wouldn't see a gigantic box of cast-off bear spray cannisters and holsters at Kirsten's just over the Wyoming / Colorado border. What, as soon as you're out of bear country, you're suddenly immune to bobcats and mountain lions?  If you had a secure mounting point for your bear spray, you'd probably keep it with you for the whole trip. Just sayin. This is the bikepacking-inspired design, optimized for front fork, handlebar, stem, or top tube use, it can be mounted using zip ties or water bottle bosses. It works with all 8oz bear spray cannisters. Produced with PETG resin, the unit is water, heat and UV resistant.  The bear spray literally "clicks" into place and is held there very securely by the 3d Printed mount. Unlike every other bear spray holder in the universe, it doesn't rattle around.  75g. OK, just got back from a product scouting trip to Cabela's, the mega outdoors store, there's one less than 10 miles from our HQ here in Indiana. The bear spray section was impressive. They had four SKUs of bear spray, and one SKU of a bear spray belt loop cozy. Of the four bear spray SKUs, only one worked with the bearclaw holster--the 7.9oz Outdoorsman brand. Anything that's in the 7.5oz - 8.5oz range will work. I suspect all of these things are produced at the same factory and branded by the companies that market them. So continuing my product scouting info, the 9.2 oz Outdoorsman brand SKU at Cabela's is too tall to work with the bearclaw holster and the MACE "Guard Alaska" Bear Spray also wouldn't work, it's also 9.2oz. Maybe TMI here, but it's interesting to me that all of the bear spray SKUs came with a belt loop cozy carrying case (useless if you're going to keep it in your BearClaw Holster) and also interesting that the pricing for the 7.9oz is the same as the 9.2oz. Anyhoo, it might be better to buy your bear spray online because you can find it cheaper, get the right volume, and without paying extra for the useless belt loop cozy. Here's a link to a review in pinkbike:  2023 Tech Week Three orientations available: "Center" - which has a straight pull orientation that is aligned with the center of the frame and with the water bottle bosses. Buy this one if you have a standard frameset and want to mount it to the water bottle bosses. This is the most commonly purchased unit. "Left" which has a left pull orientation relative to the water bottle bosses. Really useful for mounting on a rear suspension frameset if you're left handed and want to pull from the left. If you want to mount it on your right fork blade and be able to grab it with your right hand, this is the right one to buy.  "Right" which has a right pull orientation relative to the water bottle bosses. This one is really useful for mounting on a rear suspension frameset if you're right handed and want to pull from the right. If you want to mount it on the left fork blade and be able to grab it with your left hand, this is the one to buy.  Ok, so the whole orientation thing is super confusing with the stage right / stage left thing on the fork Vs. the frameset. If you're not sure which to get, "Center" is probably the right choice.  Left and Right orientations are great for suspension MTB bikes and for super-technical bikepacking buildouts that leverage every nook and cranny of the bike. Don't hesitate to email us at jefe@jefe.bike if you have any questions. Ships with a useful instruction sheet, two stainless steel waterbottle mount bolts, and two zip ties, along with the BearGrip EZ-Mount Kit If you're looking for a permanent mount - the basic BearClawHolster is available for $44.95 without the BearGrip EZ-Mount Kit.  If you dig this product, you should consider our Titanium anti-bear whistle  Some info on the efficacy of bear spray vs. firearms when backpacking / bikepacking from Montana rancher with significant ultralight backpacking experience:   8 minute video - totally worth it Finally, look at the pros using this awesome product!     See the bearclaw holster in action on Ted King's 2023 Tour Divide attempt. He's using a fixed mount Bearclaw Left Draw. It can be seen throughout the video but prominently between minutes 9 - 10, 12 - 13, and 20-22.