PWP Single RO/DI System

PWP Single RO/DI System OVERVIEW:  The Pure Water Power Single RO/DI stands out as an affordable and high-quality water-fed system, guaranteeing pristine results for your customers' windows. Featuring a four-stage water purification process, this system not only ensures superior quality but also enhances the efficiency of your work. Filtration Process Pure Water Power has designed this RO/DI system to feature an optimized tap-pressure water output, delivering between .5 and 1 gallons per minute. Achieving this involves the incorporation of four distinct filtration stages, ensuring the most effective and economical filtration process available. This process starts as the incoming water supply gets filtered through the sediment filter, removing rust and large solids from the water. Next, the water travels through the carbon filter to eliminate chlorine. After traveling through both filters, the water then moves through the RO membrane which will remove 98% of the total dissolved solids, or TDS. Finally, the water filters one last time during the deionization stage in order to bring the TDS level down to 0. Construction This unit comes equipped with durable brass quick connections and standard garden hose fittings. Additionally, a stainless steel RO housing safeguards the 40-inch membrane while the 10-inch sediment, carbon, and DI filters are shielded by durable plastic casings for added protection. With user-friendliness in mind, the included rubber feet are meant to provide stability on uneven surfaces while the unit stands upright. The rubber hand grips and the inclusion of flat-free wheels allow for comfortable transportation, facilitating smooth rolling from your vehicle to the desired location. All these high-quality components are securely mounted on a robust, rust-resistant, powder-coated steel frame that maintains stability when positioned upright.  Output This water purification system has the capacity to generate between .5 and 1 gallons per minute at elevations of up to 50 feet, given a source pressure of 50 PSI. To ensure optimal water flow, it is advisable to use a water-fed output hose with a diameter of at least 5/16 inches. Simply thread this hose through your preferred water-fed pole, and you're ready to start your cleaning process. **Info and specs in the printed manual may be outdated. Please reference this product listing for up-to-date info.