Push Plastic Carbon Fiber

Push Plastic Carbon Fiber ABS, PETG, PC/PBT, and Nylon 10% Carbon Fiber fill on all Resins Added stiffness Improved dimensional stability Excellent surface finish Recommended Print Settings: CF PC/PBT: Extruder:  250-260°C. (Better layer bonding at higher temperatures) Bed:  90 - 100°C Hardened Nozzle: 0.4mm or larger (.6mm recommended) Layer Height:  Ideal layer height is 50-60% of nozzle diameter CF ABS: Extruder:  230-240°C Bed:  110°C Hardened Nozzle: 0.4mm or larger  (.6mm recommended) Layer Height:  Ideal layer height is 50-60% of nozzle diameter CF PETG: Extruder:  240-250°C Bed:  90°C Hardened Nozzle: 0.4mm or larger  (.6mm recommended) Layer Height:  Ideal layer height is 50-60% of nozzle diameter CF Nylon: Extruder:  240-260°C. (Better layer bonding at higher temperatures) Bed:  90 - 100°C Hardened Nozzle: 0.4mm or larger  (.6mm recommended) Layer Height:  Ideal layer height is 50-60% of nozzle diameter Drying - Nylon will absorb more moisture than other resins when left exposed. Make sure to keep this filament in a dry location between uses.  If the filament does get wet, you can dry it out for 2-3 hours at 70-80°C