D2S/D2R LED Conversion Kit for Nissan & Infiniti - Plug & Play | Pro Series

The World’s First Custom OEM HID to LED Conversion Kit Has Finally Arrived on The Market Today, a lot of Nissan and Infiniti aftermarket HID bulbs/ballast can be found on the market. But as for the LED, there are very few manufacturers who can offer you a real solution for the installation problem. So what if my HID bulbs are burnt out? Being dim? Is there any great solution to upgrade to OEM HID bulb EASILY and FAST? Fortunately, Lasfit has a New OEM HID D2S/D2R to LED Conversion Kits Solution. They can perfectly fit HID projector housing of many Nissan and Infiniti.  What are some troubles you'll run into when replacing your OEM HID bulbs / ballast? 1. You can purchase new OEM HID bulbs, but they’ll be outrageously expensive. If you have the unfortunate experience of an HID ballast going out, or an HID bulb dying, then you’re looking at over $500 plus labor charges for an OEM replacement part. 2. If you decide to buy a used OEM HID replacement part, how would you identify its remaining lifespan? No one really knows. 3. Purchasing a new HID kit from an aftermarket company can be difficult. The aftermarket is filled with low-quality HID kits that are marketed as high quality, and, supposedly, equal to OEM HID systems. Most are extremely low quality, and the type of products you don’t want to waste your money and time on. 4. You can replace them with aftermarket universal LED bulbs, but it requires you to cut and splice wires. It isn’t an impossible task, but it’ll be challenging. The potential for mistakes is high if you don’t know what you’re doing. The performance won’t be what you expected Based on what we saw available on the market, we knew there was room for improvement. So, we decided to tackle the challenge ourselves. We’re proud to announce that the Lasfit Pro-IN-D2 LED bulb conversion kit is now available. It’s the easiest solution on the market for upgrading the factory D2S HID bulbs. Compatible car models NISSAN * For 2003-2008 350Z * For 2009-2020 370Z * For 2009-2013 GTR * For 2003-2014 Murano * For 2004-2014 Maxima * For 2007-2014 Altima * For 2008-2014 Rogue * For 2011-2017 Quest SUBARU * For 2004-2014 Impreza WRX * For 2004-2005 WRX STI * For 2006-2013 Forester        MAZDA * For 2007-2012 CX-7 * For 2010-2013 Mazda 3            * For 2009-2011 RX8 * For 2006-2015 MX-5                              INFINITI  * For 2003-2007 G35 Coupe * For 2005-2008 G35 Sedan * For 2008-2013 G37 Sedan * For 2007-2014 G37 Coupe * For 2005-2006 Q45 * For 2014-2015 Q60 * For 2015 Q40 * For 2005-2014 M35/M37/M45/M56/Q70 * For 2008-2017 EX35/EX37/QX50 * For 2012-2018 JX35/QX60 * 2004-2017 FX35/FX45/FX50/QX70 * 2004-2015 QX56/QX80                                           Replace OEM Part Numbers: Matsushita NZMNS111LBNA, NZMNS111LANA, NZMNS111LANH, NZMNS111LANG; Nissan / Infiniti 28474-89904, 2847489904, 28474-89907, 2847489907, 28474-89915, 2847489915, 28474-8991A, 284748991A, 28474-8991B, 284748991B, 28474-8991D, 284748991D, 28474-8992A, 284748992A, 28474-8992D, 284748992D  How to Convert Your HIDs to The Lasfit Pro-IN-D2 LED Bulbs & ballast Installation Tips: The LED bulb is a 360° adjustable socket. As shown in the video, you need to take out the base collar from LED bulb, and lock in the socket with the spring/latch, then put the LED bulb into it. Please make sure the power cable is downward. If the beam pattern is not good or very dim, you can turn LED bulb to adjust the beam pattern. NOTE: The LED kit in the video is the old version. We're going to shoot a video for the new version.   Products Features: Wattage: 50W per bulb Lumens: 5500LM per bulb Color Temperature: 6000K Voltage: 9V-16V Waterproof Rating: IP67 Waterproof Attention: 1. You need to remove the front bumper and the whole assembly. 2. The bulb driver directly bolts onto the OEM location of the HID ballast. 3. Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged. Application: HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE. Note: This usage regulation is not unique to Lasfit bulbs. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA) HOMOLOGATION ECE: NO