Pride Go Chair Bracket | PRD

Pride Go Chair Bracket The Pride Go Chair Bracket mounts under the armrest of Pride Go Chair Powerchairs.  The bracket slides into the square receptacle under the armrest that is used on the opposite armrest to secure the joystick controls.  The bracket is secured in place by tightening the set screw on the bottom of the square receptacle. Installation Instructions included for additional details. Before ordering check the underside of the armrest to make sure that it has the square receptacle and that no other accessories block access to the receptacle.  The bracket is 7 1/2" long.  Check the measurement from the end of the armrest to the square receptacle to confirm that it is less than 6 1/2".  Mounting arm attaches with screws to the underside of armrest chair. Bracket is specific to mobility device. Screw holes are pre-existing in armrest. Some special applications may require a longer bracket.  If this is the case with your chair contact us to ensure the proper product is purchased. Once installed the SnapIt! accessory snaps into the bracket.  This allows the accessory to be removed for transport or used on other devices with the purchase of additional brackets. All holders come with a SnapIt! bracket. This item is a replacement or additional bracket for use on a second mobility device. Cup/phone holders can be snapped/attached to any bracket.  Pride Go Printable Instructions