Prerunner Series SCX10 III Base Camp Front Bumper

Scale looks abound in our latest release for the new Axial Adventure SCX10 III Base Camp Truck! The Prerunner series was designed for a combination of looks and performance under scale use. Made from 3/16" rod, the Prerunner Front Bumper for the SCX10 III Base Camp is a low-profile and scale trail armor option. Full-width Steel, welded Prerunner Series Front Bumper for the SCX10 III Base Camp (MADE FOR STOCK VEHICLE- Any modifications may affect clearance. See our low-profile prerunner bumper HERE if running larger tires or adjusting shocks lower) Specifications: -Approx. 198mm wide. Wrapped ends match width/angle of body. - Mounts using included hardware. Spacer/additional washers may be necessary. - Steel construction - Hand Made/Welded. - Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.  **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own, -Flat Black: not as susceptible to chips Mounting Instructions: 1. Bumper is made to slide inside the c-channel of the frame rails.  2. Use washers (included) or spacer (not included) between steering link and frame rails. Use longer screws (included). Back screws with a washer and nut.