Pre-Coated Premium Starter Bundle

The Pre-Coated Premium Starter Bundle includes the components and tools needed to perform Smart Denture Conversions with Pre-Coated TiBases. Each Pre-Coated TiBase arrives encased in a polycarbonate shell with the threaded post pre-assembled inside, so there is no manual pre-coating step before pick-up. The bundle pairs 10 Pre-Coated TiBases with matching lab analogs, prosthetic screws and chairside instruments, plus Rapid Set Pickup Acrylic and two Single Arch Dam Conversion Kits for isolation during pick-up. If you are working with standard TiBases and Separable Fasteners, see the Premium Starter Kit. Bundle Includes (10) Pre-Coated TiBases (10) Lab Analogs (10) Prosthetic Screws (10) Press-On Caps (10) Protective Plugs (1) Rapid Set Pickup Acrylic, 2 Arch Pack (2) Single Arch Dam Conversion Kits (1) Drill Kit (1) Low Torque Driver (1) Retrieval Tool (1) Pin Vise Configuring Your Bundle Pre-Coated TiBase – Choose the standard Pre-Coated TiBase, or the Extended Thread version, which has a longer threaded post for Straumann compatibility. Lab Analogs – Choose SDC Default (M1.4x0.3) or Omnibut (M1.6x0.2). Prosthetic Screws – Choose SDC Default, Straumann or Omnibut to match the multi-unit abutment system you are restoring. Driver Information Threaded Post – Tighten with T5 (SDC Low Torque Driver) Prosthetic Screw SDC Default – M1.4x0.3 Thread – Tighten with a Unigrip Driver (Nobel) Straumann – M1.4x0.3 Thread – Tighten with an SCS Driver (Straumann) Omnibut – M1.6x0.2 Thread – Tighten with a T6 or SCS Driver (Omnibut) Note: Omnibut Prosthetic Screws have a larger diameter and finer thread than most industry-standard prosthetic screws, so they may not be compatible with some tools and accessories commonly used in dental offices.