Prefab Bed Cage

Description The Dirt King Prefab Bed Cage was developed after building numerous custom bed cages. With that experience we've perfected the design for maximum travel and easy installation. The bed cage takes up minimal bed space while not compromising strength. Accessory mounting holes are incorporated into the center section of the cage to mount dust lights and flag whips. The entire kit bolts together and mounts to the vehicle using the factory bed bolts. It can be installed with leaf over or leaf under spring packs. This suspension system is superior to a cantilever suspension system for two major reasons. The first reason is the shock mounts on the bed cage are outside the frame rails vs inside the frame rails for increased stability. The second reason is the shocks are mounted vertically with a motion ratio close to 1:1 allowing for proper dampening through the suspension travel. The cantilever suspension has a higher motion ratio resulting in smaller shocks, difficult to valve properly, and heating up the shocks faster since they have less fluid. The Dirt King Prefab Bed Cage is your best choice to increase rear suspension performance while not breaking the bank.  Specifications Recommend Leaf Pack: Deaver V115 (works with Deaver L84) Recommend Shocks: Fox or King (works with all shock manufactures) Recommend Shock Length: 16" (26" collapsed, 42" extended) - works with 14" shocks with extended rod ends Recommended Shock Diameter: 3.0" (works with 2.5"-3.5" shocks) Bypass Tube Layout: Bypass tubes on front and back of shocks Bed cage Shock Mounting Width: 1.5" Axle Width: Requires 2" wheel spacers or 2" wider per side axle (Raptor axle doesn't require wheel spacers) Accessory Mounting Hole Size: 1/2"  What's Included Prefabbed bed cage structure Grade 8 mounting hardware Installation instructions   Features CAD designed  Boxed plate and tube construction Bolt on application 2"x.120" tubing 1/4", 3/16", and 1/8" plate Professionally MIG welded Proudly made in the USA   Compatibility 2015-2020 Ford F-150 2WD / 4WD 2017-2020 Ford Raptor 4WD *Long bed F150's will require the end user to fabricate custom mounts for the front mounting points of this bed cage. *Returns or cancelations on powder coated bed cages are subject to a 10% restocking fee.