PR Guitar Kit w/ Flame Maple Veneer

Build your own DIY guitar with mahogany body right-handed PR guitar kit with a beautiful flamed maple veneer. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Intermediate (6/10) Straightforward wiring with few connections to solder, but the flamed Maple veneer is thin and easy to sand through, so use a light touch at the edges Tune-o-matic bridge sets intonation quickly once the posts are seated Set-in neck has to be aligned and glued before finishing, which is the step that most affects intonation Body Material: Mahogany (1 piece) Type: Solid Cutaway: Double Binding: None Top Veneer: Flamed Maple Neck Material: Mahogany Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75" Binding: None Fretboard Material: Ebony (Engineered) Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Pearl White Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 1 Volume, 1 Tone, 3-Way Toggle Wiring: DIY (soldering required) Wiring Diagram: HH, 1 Volume, 1 Tone, 3-Way Switch Output Jack: Side jack Hardware Bridge: Tune-O-Matic w/ stopbar Tuners: Black Sealed Pickguard: None Knobs: Black Cavity Covers: Black Strings: Steel Finish: Black What's in the Box Body with flame maple veneer top, unfinished Neck with dark fretboard and pearl-white block inlays, unfinished 6x black sealed tuners with bushings and washers 2x black-covered humbuckers with black mounting rings Black tune-o-matic style bridge and black stop tailpiece with posts and bushings Pre-wired wiring harness with two potentiometers and toggle switch Output jack with black mounting plate Black truss rod cover Black plastic control cavity cover 2x black knobs Set of strings Truss rod adjustment wrench Guitar cable Assorted black mounting screws and washers What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.