Portable Spill Containment Berm with Foam Walls

Deploy compliant secondary containment anywhere with this portable spill containment berm. Designed to support OSHA 1910.106, NFPA 30, EPA 40 CFR 112 SPCC, and DOT 49 CFR 130 staging requirements, the berm captures leaks from drums, totes, generators, frac tanks, and vehicles during fueling or maintenance. The drive-over foam side walls rebound after vehicle entry, allowing trucks and equipment to roll on and off without manual setup. The chemical-resistant XR-5 or PVC liner is welded at the seams for full liquid integrity and folds compactly for transport. Key Features Self-rising foam walls rebound after vehicle drive-over Welded chemical-resistant geomembrane liner Folds flat for storage and rapid redeployment Reinforced corners and abrasion-resistant track strips UV-stable for indoor or outdoor staging Typical Specifications Containment volume: 150-3,000 gal Liner: 22-30 oz PVC or XR-5 reinforced geomembrane Wall height: 4-12 in compressible foam Footprint: 6 ft x 6 ft up to 15 ft x 50 ft Operating temperature: -30 deg F to 180 deg F Weight: 30-180 lb Common Applications Vehicle and equipment fueling under SPCC plans Drum, tote, and generator secondary containment Frac tank, vac truck, and tanker staging Emergency spill response and decontamination