Polywater® Prelube 2000™, CABLE BLOWING LUBRICANTS

Description Increases installation distance when blowing fiber optic cable. Polywater® Prelube 2000™ lubricant is developed for conduit pre-lubrication during cable blowing. It reduces frictional drag and increases the distance cable can be installed in a continuous length through its efficient coating thickness. Polywater® Prelube 2000™ Cable Blowing Lubricant Increases blowing speed and distance Coats duct efficiently and lubricates, even after drying Recommended by blowing equipment manufacturers Fiber Optic Cleaning Improper cleaning is the top cause of network failures. The tolerance to dirt or contamination on the ends of the ferrules of a connector is near zero. Network operators claim that 15-50% of all network problems can be traced to dirty connectors causing connection problems. Mitigate the risk of fiber optic contamination with fiber optic cleaners, fiber cleaning pens, and cleaning wipes. These handy fiber cleaners can remove contaminants like: dust, dirt, oils, film residue, and solvent coating. Airborne dirt particles are about the size of the core of SM fiber and are usually silica-based - they may scratch PC connectors if not removed! Patch panels have mating adapters that can become contaminated if left open to the air or scrape off foreign particles under repeated usage. We recommend you always keep dust caps on connectors, bulkhead splices, patch panels, or anything else that is going to have a connection made with it. Features Features LOW FRICTION Increases blowing distance TESTED AND APPROVED Endorsed and recommended by most blowing equipment manufacturers for reliable and cost-effective operation of equipment COMPATIBLE WITH CABLE JACKETS Suitable for pre-lubrication of a variety of cable jackets and conduits CLEAN APPLICATION Leaves minimal residue and performs even when dry WINTER GRADE FORMULA Available for use in sub-freezing temperatures Product Notes Passes all compatibility tests for PE jacketed cables. Non-hazardous and residue is noncombustible. Approved for use in networks globally and promoted by equipment manufacturers. Specifications Download Spec Sheet Download Installation Guide SDS: Winter Grade WP SDS: Regular Grade P TECHNICAL SPECIFICATIONS PROPERTY RESULT APPEARANCE SLIGHTLY THICKENED, WHITE LIQUID % NON‑VOLATILE SOLIDS 6% VOC CONTENT 0 G/L (STANDARD)   278 G/L (WINTERGRADE) VISCOSITY 5000–15000 CPS @ 10 RPM PH 6.5–8.0 Additional Information Product Videos POLYWATER® PRELUBE™ HIGH-PERFORMANCE CABLE BLOWING LUBRICANT THREE KEY FACTORS FOR CHOOSING THE RIGHT CABLE LUBRICANT What's in the Box What’s in the Box Qty 1 - Polywater® Prelube 2000™, CABLE BLOWING LUBRICANTS SKU # Winter Grade SKU # Package Description Units/Case P-35 WP-35 1-quart / 0.95-liter squeeze bottle 12 P-128 WP-128 1-gallon / 3.8-liter jug 4 P-640 WP-640 5-gallon / 18.9-liter pail 1