Polymaker PolyLite PC Polycarbonate 3D Printer Filament 1KG 1.75mm

PolyLite™ PC is produced using a polycarbonate resin specifically engineered for 3D printing. It delivers good stiffness and heat resistance with light diffusing properties. Does PolyLite™ PC absorbs moisture? The short answer is yes, PolyLite™ PC will absorb moisture slightly faster than regular PLA. We recommend using a dry box to achieve high quality and strong prints. Printing, Drying and Annealing Settings? Printing Temperature: 250˚C - 270˚C Bed Temperature: 90˚C - 105˚C Printing Speed: 30mm/s - 50mm/s Fan: OFF Direct Drive: Retraction Distance: 1mm Retraction Speed: 20mm/s Indirect Drive: Retraction Distance: 3mm Retraction Speed: 40mm/s Drying Settings: 75˚C for 12h (Only if the material has absorbed moisture) Annealing Settings: 90˚ for 2h Does PolyLite™ PC requires an enclosed 3D printer? Yes and no, you can watch the reviews below for more information but the rule of thumb is the bigger your print (more than the size of your fist) the more the enclosure will be required for dimensional stability.   Spool Dimensions? 1kg cardboard spool: Spool Inner Hole Diameter: 55±1mm Spool Diameter: 200±1mm Spool Width: 65.6±2mm Spool Weight: 140±7g