Pole Mount Kit for 3/4" PVC and RAM mount 4-hole AMPS pattern C or D size ball

Mounting your livescope on a PVC pipe? This kit completes your setup.  The kit is equipped with heavy duty and robust clamps for easy adjustment on the fly without any tool. One free cable clip is included to snap onto the PVC pipe to hold the transducer cord. This is to lower the cost of this kit. Additional clips can be purchased separately.  The end piece is designed specially for each different model. All variations utilizes your existing hardware (bolt/washer) on your current setup.  Garmin Livescope LVS32 - use the shoulder bolt, washer, and rubber spacer from your existing system.  Garmin Livescope LVS34 - use the long bolt with the big knob.  Garmin Panoptix PS22 - use the same knob with screw you currently use.  Lowrance Active Target 1 and 2- use either the shoulder bolt/washer or the knob screw. I updated the design to allow the knob screw to reach the transducer.  Lowrance Eagle Eye 9 - Use your existing small screw (M6 size).  MEGA Live - use your existing small screw and lock washer. It needs to be loose as it needs to rotate.  Supports all three viewing modes, Forward, Down, and Perspective! Not applicable to Lowrance Eagle Eye and transom mount.  RAM mount is not included. C size 1.5" ball at minimum is recommended for stability and holding power. The middle piece is designed specifically to fit the hole pattern of the C size round base mount (RAM-202U).  4-Hole AMPS: 1.181" x 1.496". There are many knockoff versions on Amazon as well. Be sure to match the hole pattern.