PM9011 = JAX Rust Preventer for Iron & Steel – 2 fl oz

JAX Rust Preventer is a ready-to-use, water-based treatment that helps protect clean iron and steel surfaces from rust. Apply it to tools, components, hardware, and other suitable iron or steel pieces after the surface has been thoroughly cleaned. The solution is used at full strength and allowed to air-dry, leaving a protective coating on the metal. Directions: • Remove lacquer, oil, grease, wax, and existing surface contamination. • Apply with a bristle brush or dip the piece into the solution. • Allow the treated piece to air-dry completely. • Do not rinse after application. • Use full strength.  Do not dilute. Product details: • For iron and steel • Ready-to-use water-based formula • No mixing or dilution required • Net contents: 2 fl oz • Made by JAX Chemical Company Safety information: Use in a well-ventilated area. Avoid breathing vapors, mist, or spray. Avoid contact with skin and eyes. Wear nitrile or neoprene gloves and appropriate eye protection during use. Wash thoroughly after handling. Keep the container closed when not in use and keep out of reach of children. Avoid release into waterways or drains. Read and follow all directions and cautions on the manufacturer’s label before use. Do not mix with other chemicals. Due to the nature of this product, returns are not accepted. Jax Chemicals should also be used with care by experienced crafts people. Please read and follow directions and cautions. Keep out of the reach of children.