ADV990 Platinum Reflective Safety Ink

ADV990 Platinum Reflective Safety Plastisol Ink Platinum Reflective Inks are retro-reflective inks with enhanced visibility for safety professionals, fashion, and novelty-type designs. Platinum Reflectives, when exposed to a focused beam of light will reflect light back to the light source. State-of-the-art reflectivity on light and dark grounds Ready-for-use or tintable. One part formulation Excellent adhesion to fabrics, good post-wash reflective Features Highly Reflective No Underbase Needed Ideal for Safety Professionals Smooth Surface Excellent Adhesion & Washability Cure: 320F Application Tips Stir inks before printing Use consistent, high-tensioned screen mesh and sharp-edged squeegees for the best print results For best reflective properties, print directly to fabrics. Direct printing allows the ink to sink into the fabric leaving the reflective media on top for brilliant reflectivity Platinum Reflectives are not recommended on tightly woven fabrics such as nylon or printed over an under base as this will diminish the reflectivity properties. Proper ink deposit is critical to achieving best reflectivity results. For best care, hand wash or machine wash on cold cycle with the garment inside-out Label garments with suggested wash instructions Technical Specs Flash: 200-220F Cure: 320F Bleed Resistance : None Build Up : print last or flash Finish: Satin Shelf Life: 24 months+ Substrates: 100% cotton, 50/50. cotton/ poly blends, some synthetics and some 100% Poly Mesh Selection: 60-110 Tension: 15-20 acceptable, 25-35 recommended Squeegee: 70 or 70/90/70 durometer Squeegee Pressure: Avoid excess pressure Squeegee speed: Medium  Curable Reducer: Add up to 5% to lower viscosity Stencil: CBX7500 or CBX7700 recommended or any emulsion or capillary film. WashUp: ECO3000 or ECO4440 or any ink degrader. Avoid contact with eyes, skin and clothes. Avoid breathing vapor or mist. Do NOT swallow. Consult SDS Safety Data Sheet. FIRST AID: In case of contact, flush with plenty of water for at least 15 minutes. If symptoms are severe or persist, get medical attention.. If inhaled remove to fresh air, if breathing is difficult give oxygen and get medical attention. Phthalate Compliant Inks manufactured for Kolormatrix are certified by one of the largest plastisol ink manufacturers in the world to be Phthalate Compliant and does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of Claira High Opacity Non-Phthalate Inks.