Plastic Razor Blades

Box of 100 plastic razor blades. • Lift and peel away vinyl, dirt, grime, was, tar, gum and any other substance • No damage to surface area • Gentle enough to use on delicate surfaces • Will not rust or corrode • 100 per pack  USES: Plastic Razor Blades can be used on a variety of surfaces and detailing jobs. They can remove most stuck-on paints, adhesives, or other muck without damaging the surface like harder steel razor blades.  These standard-sized, double-edged, plastic razor blades fit in most razor blade holders. Blade color may vary. 200 long lasting usable edges per pack.  IronWood Designs makes their blades with a special block copolymer polypropylene designed to take a sharp edge, have high strength, and stiffness. The plastic also resists many chemicals and solvents. Instructions: For best results add an appropriate solvent to the surface being cleaned (glass cleaner for glass, etc.). Wipe the blade clean often to reduce the number of contaminants collecting on the blade (just as you would with a squeegee). Use the blade holder of your choice to obtain a comfortable grip while holding a low angle at the blade tip. This will provide better leverage. Be sure to replace blades often enough to reduce the risk of scratching after working on crusty dirt or sand particles. Remember, the blade is designed to fail against the contaminants rather than pushing them into your surface material.  Warning: Test in hidden area to ensure scratch free scraping.  Wipe blade of debris after each stroke.  Fits most blade holders.  Designed for scraping, not cutting.  Sharp edges.  Choking hazard.  Wear eye protection at all times.