PlashLights RGBW BLUETOOTH™ LED LIGHT CONTROLLER - WATERPROOF

Bluetooth LED Controller RGB / RGBW PlashLights™ waterproof Bluetooth controller is operated via a mobile phone app to turn on/off,  adjust the brightness or color, adjust color temperature, and change preset color patterns. There are a variety of lighting patterns to choose from. The operation is very simple with your devices control (IOS or Android).  Your device (ie. phone) is not needed when a switch is installed as the lights will defer to the last setting when powered on.  Example:  If you have them on a blue strobe pattern and turn the power of at a switch or the Perko, when power is applied at a later date the lights will be on blue strobe.  Basically, your device/phone is only required to change the color or patterns. Descriptions: Requires download of PlashLights™ APP (FREE) Simple to mount with a tab on each side IP67 Rated Enclosure = Waterproof Easily control and synchronize up to 240 Watts of lighting 30A when RGB used (10A/per channel)   40A when RGB+W used (10A/per RGB channel & 10A white) Compatibility: bluetooth 4.0 (bluetooth phones of 4.0 or above) Supports mobile phone system: IOS 6.0 android 4.3 or above Operating  Voltage: 12~24V DC Software language: English Control distance: 30 feet  Size: 3-13/16" long x 1-1/4" tall x 1-15/16" wide Working temperature: - 4°F to 145°F 100% MADE & ASSEMBLED IN USA  Control Operations: Instructions included in package and on APP Multi-Zone Sync Feature: Control multiple zones with multiple controllers as they will all sync together (each controller is sold separately). Notes: Do not place the RGBW controller inside a metal container as it will block the signal. Double-check your incoming voltage as this controller cannot accept reverse polarity, AC, or DC voltage over 24V. This controller will operate both normal RGB (Red, Green, & Blue) and RGBW (RGB + White).