EZ-Connect PIR and Daylight Sensor | Black | 12/24VDC | IP65 | LinmoreLED PIR-BK-EZ10

Achieve maximum energy savings and smart building compliance with the EZ-Connect™ PIR and Daylight Sensor. Finished in a rugged, matte black engineering polymer (Product Code: PIR-BK-EZ10), this advanced dual-technology control module combines precise Passive Infrared (PIR) occupancy sensing with smart daylight harvesting capabilities. Designed specifically for high-ceiling industrial warehouses, commercial staging yards, and open-air parking configurations, this plug-and-play sensor interfaces instantly with any Linmore LED or Ace LED commercial fixture equipped with an EZ-Connect™ receptacle system. By adjusting light levels dynamically based on both human activity and natural sunlight, it helps facility managers cut unnecessary energy waste without requiring expensive rewiring or structural overhauls. The PIR-BK-EZ10 is built to withstand demanding environmental conditions, featuring a heavy-duty black polycarbonate housing rated for full IP65 dust and moisture protection. Optimized for elevated placements, it supports mounting heights up to 40 feet (12 meters), projecting a wide 360° circular coverage pattern that spans up to a 50-foot (15-meter) detection radius. The sensor monitors thermal shifts caused by moving people, vehicles, or equipment, triggering an integrated LED motion indicator for easy on-site testing. To maximize ambient sunlight usage, its integrated daylight harvesting cell automatically dims or turns off the luminaire when natural light surpasses target levels, lowering overall utility costs. Precision Customization & Rapid Tool-Less Commissioning: Equipped with an EZ10 Twist-Lock connector base, the PIR-BK-EZ10 installs in seconds. Field crews simply align the contact pins with the fixture's exterior port, push in, and twist to establish a clean, sealed low-voltage 12-24V DC control loop without touching any interior wires. While ready to go out of the box, the sensor can be deeply customized using the optional handheld remote programmer (SEN-PROG, sold separately). This remote allows technicians to modify sensitivity levels, hold-time intervals, standby dimming thresholds, and daylight parameters safely from ground level. Key Applications: High-Bay Warehouses & Logistics Hubs: Controls illumination across vast aisle layouts, safely dimming unoccupied rows down to energy-saving standby levels. Commercial Parking Lots & Open Staging Yards: Enhances site security and visibility by instantly shifting from low-level accent lighting to full output upon detecting vehicle or pedestrian motion. Cold Storage & Industrial Facilities: Operates reliably down to -4°F, making it ideal for food processing areas or unconditioned transit corridors. Exterior Building Pathways & Common Areas: Automatically adjusts fixture output based on changing seasonal daylight trends, maximizing energy efficiency. Technical Specification Technical Specification Product Details (EZ10 High-Bay Multi-Control Sensor Profile) Item Number / Part Code PIR-BK-EZ10 Product Name EZ-Connect™ PIR and Daylight Sensor Control Automation Category Multi-Technology Motion, Occupancy, and Daylight Harvesting Sensor Sensing Technology Passive Infrared (PIR) Thermal Detection & Photoelectric Cell Connection Method EZ10 Base Interface (EZ-Connect™ Twist-Lock System) Mechanical Installation Tool-less Manual Insertion & Clockwise Lock Rotation Input Driver Voltage 12-24V DC Low-Voltage Power Input Active Current / Standby Power >50 mA Active Current / >50 mA Standby Power Control Signal Output 0-10V Standard Automation Loop, 25 mA Maximum Mounting Height Up to 40 Feet (12 Meters) Optimal High-Bay Position Maximum Detection Range Up to 50-Foot (15-Meter) Radius Footprint Sensing Coverage Pattern 360° Conical Sphere (Best with Clear Line of Sight) Visual Diagnostic Tool Integrated Red LED Motion Detection Indicator Housing Construction Material High-Impact, UV-Stable Black Polycarbonate Environmental Safeguards Wet and Cold Location Approved; Ingress Protection IP65 Ambient Thermal Range -20°C to +60°C (-4°F to +140°F) Fixture Compatibility Linmore LED and Ace LED Fixtures with "EZ10" Part Suffix Field Programming Method Via Wireless Handheld Remote Programmer (SEN-PROG, Sold Separately) Compliance Certifications UL Listed, FCC Certified, DLC Qualified, RoHS Compliant Commercial Warranty 5-Year Comprehensive Operational Guarantee Programmable Sensor Settings (SEN-PROG Adjustable) Parameter Mode Selectable Options / Step Intervals Sensitivity (Detection Area) 25% / 50% / 75% / 100% (Adapts to site layout constraints) Hold Time (Full Output) 10s / 1min / 5min / 10min / 15min / 20min / 30min / 60min Daylight Threshold On 10 Lux / 30 Lux / 50 Lux / Current Ambient Lux Value Daylight Threshold Off 100 Lux / 300 Lux / 500 Lux / Disabled Stand-by Time (Dimmed State) 1 min / 30 min / 60 min / +∞ (Infinite standby dimming) Stand-by Dimming Level 0% (Complete Shutoff) / 10% / 30% / 50%