Pink & Green Heart | Embroidery Patch

This is an iron on or sew-in Embroidery Patch! Perfect for DIY! Sweatshirts, Bags, Hats...etc.! * Hat is not included, for photo purpose only! Size: Approximately 2.16 inches wide 2.16 inches high Instructions: 1. Place the patch on the material emrboidery side up 2. Place cotton fabric over patch (or Teflon *preferred/Parchment Paper). 3. Iron over patch, applying pressure, on high (approx. 150f) for about 30 seconds without steam. 4. Iron inside of garment underneath patch for 30 seconds *Repeat as necessary Professional Heat press temp is about 320f degrees, but temperature could vary by machine. Do not apply direct heat to the embroidery side of the patch without protective layer (or Teflon *preferred/Parchment Paper). Always press from underneath - garment or bag/item inside out ***We are not responsible for melting or overheating.  Make sure adhesive melts (without bleeding out the sides of letter/patch) and the patch is firmly attached, and the edges are secure. The patches can also be stitched to prevent patches from falling off or use liquid stitch.  Machine wash delicate, INSIDE OUT, always cold water no bleach or fabric softeners Air dry is the best option - never dry on heat cycle or use fabric softeners