PING G740 Custom Irons - 26

PING G740 Custom Irons The G740 maximizes distance, forgiveness and consistency, making it a great choice for golfers who best fit into a super-game-improvement iron, delivering faster ball speeds and higher launch. Its wider sole, longer blade length and thicker topline combine to lower the CG and increase the MOI for more forgiveness. The PurFlex cavity badge, with three flex zones, helps control face bending while enhancing feel and sound. Available 5-9, PW, UW, 50°, 56°. TECHNOLOGY WIDER DUAL-CAMBER SOLE The dual-camber sole helps position the CG down and back, leading to faster ball speeds and higher launch. The club also gets into and out of the ground easier. PLEASING FEEL AND SOUND Behind the thin, flexible face a PurFlex cavity badge, with three flex zones, helps control face bending while enhancing feel and sound. LARGER, FASTER FACE The hyper 17-4 stainless steel face flexes more to generate faster ball speed, higher launch and more distance with added forgiveness to hit and hold greens. EXTREME FORGIVENESS The longer blade length and thicker topline contribute to a higher MOI, making it PING’s most forgiving iron. The larger face helps ensure more consistent strikes for the target golfer. FORGIVING SOLE The wider sole provides forgiving turf interaction and the shorter hosel allows for more mass buildup in the cavity for an improved impact experience. High-density toe and tip weights dial in swing weight. PING-ENGINEERED SHAFTS In AWT 3.0 steel, lighter long-iron shafts deliver for more speed and max height; heavier short irons offer control and precision. ALTA CB Blue graphite is a lightweight, counter-balanced design promoting mid-high to high launch. PING G740 Custom Iron Product Specs Club Loft Power Spec Loft Recto Spec Loft Lie Length Offset Bounce SwingWeight 5-iron 21.0° 19.5° 23.0° 62.0° 38 1/2" 0.25" 7.1° D0 6-iron 24.5° 23.0° 26.5° 62.5° 37 3/4" 0.22" 8.1° D0 7-iron 28.0° 26.5° 30.0° 63.0° 37" 0.19" 9.1° D0 8-iron 32.0° 30.5° 33.5° 63.8° 36 1/2" 0.17" 10.1° D0 9-iron 36.0° 35.0° 37.0° 64.5° 36" 0.15" 10.5° D0.5 PW 40.0° 40.0° 40.5° 65.0° 35 1/2" 0.13" 11.1° D2 UW 45.0° 45.0° 45.0° 65.0° 35 1/2" 0.12" 12.0° D2 50 50.0° 50.0° 50.0° 65.0° 35 1/2" 0.08" 12.0° D2 56 56.0° 56.0° 56.0° 65.3° 35 1/4" 0.08" 12.0° D3 Note: this is for your reference only and does not denote the content of the product. Shaft Specs PING AWT 3.0 - SHAFT Flex Weight Launch Angle Regular 96.0g Mid High Stiff 102.0g Mid X-Stiff 114.0g Low Mid PING ALTA CB BLUE - SHAFT Flex Weight Launch Angle Soft Regular 65.0g High Regular 72.0g Mid High Stiff 82.0g Mid Grip Specs GOLF PRIDE 360 TOUR VELVET - GRIP PING G740 Custom Iron Shafts Aerotech Aerotech SteelFiber i110CW Steel combines a graphite inner core wrapped with a steel fiber surface layer to create a light shaft with the same feel and consistency of a heavier steel shaft. This lightweight 80 gram shaft features a medium bend profile to provide a mid ball flight and spin rate.   Aerotech Steelfiber i125 CW - S SteelFiber i125 is generally preferred by players looking to maintain the overall club weight and effort it takes to swing their golf steel shafted irons but want to benefit from the stability of the SteelFiber and the vibration dampening characteristics of a graphite shaft.   Aerotech SteelFiber i70CW Steel The lightest SteelFiber shaft in our lineup is a great shaft for those slower swing speed players looking to raise ball flight and gain as much yardage as possible. This iron golf shaft is offered in a wide range of flexes and can hold up to even the most demanding swings.   Aerotech SteelFiber i80CW Steel This 80 gram shaft features a mid/stiff bend profile to provide low/mid ball flight and spin rate.   Aerotech SteelFiber i95CW Steel is the perfect transition into a lighter weight shaft which allows a player to see some good improvement in distance and vibration reduction while maintaining pinpoint accuracy and incredibly consistent distance control.   Model Flex Weight (g) Torque Kick Point Aerotech SteelFiber i110CW Steel R, S, X 110,110, 100 2.1-1.7, 1.9-1.5, 1.9-1.5 - Aerotech Steelfiber i125CW Steel S, X 125, 125 1.8-1.4, 1.8-1.4 - Aerotech SteelFiber i70CW Steel SR, R 70, 70 2.9-3.5, 2.8-3.4 - Aerotech SteelFiber i80CW Steel R, S 85, 85 3.3-2.6, 2.9-2.5 Mid-High Aerotech SteelFiber i95CW Steel R, S 95, 95 2.5-2.1, 2.4-2.0 - Fujikura Fujikura Axiom ushers in a new era of performance-driven iron shafts that deliver ultimate consistency, stability, and unmatched workability to give golfers extreme confidence with every swing.   Model Flex Weight (g) Torque Kick Point Fujikura Axiom 75 R, S 78, 78 2.2-2.5, 2.1-2.4 - Fujikura Axiom 105 S, X 105, 105 1.5-1.9, 1.5-1.9 - Fujikura Axiom 125 X 130 1.2-1.5 - KBS KBS S-Taper has finally arrived will officially available online and in finer golf retailers worldwide on Monday March 6th. This will be the newest steel shaft in the KBS Golf Shafts line after continually delivering the best steel shafts on the market for ten years.   KBS S-Taper Lite It is provides KBS signature superior feel while maintaining shot workability and tight dispersion for players seeking the ultimate tour shaft with mid/high trajectory and low/mid spin performance in a lighter weight performance frame.   KBS C-Taper Inspired by Tour player feedback, the KBS C-TAPER shaft is designed for players requiring a low piercing trajectory and superior shot control.   KBS C-Taper Lite shaft incorporates proven KBS performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin. Featuring a constant taper design and proportionate increase in wall thickness, the C-TAPER LITE optimizes energy transfer for maximum distance. Independent testing results revealed 5+ yards in added distance.   KBS HI-REV 2.0 Wedge features an active tip section that increases the effective loft of the club head, that provides added stopping power and accuracy.   KBS MAX Graphite designed for a wide range of players seeking to MAXimize the performance of their iron shafts with trajectory, spin, and distance in a consistent, lighter weight package, making it easier for you to produce performance on every shot.   KBS PGI Graphite graphite shaft that will provide the same optimal tight tolerances, dispersion and control as the KBS Tour Steel Shaft, just at a lighter weight and easier to swing shaft.   KBS TGI Graphite The KBS Tour Graphite Iron is the first Graphite Shaft to play like KBS Steel with optimized weight and stiffness per player to gain maximum play-ability & performance.   KBS Tour 105 Steel fills the much needed gap between the Tour and Tour 90 models, a slightly lighter weight shaft, all while providing precision distance and control in a shaft that players have grown accustomed to with the KBS Golf Shafts.   KBS Tour Lite designed for players seeking tight dispersion, higher trajectory, additional spin, precision control, & combining it with maximum distance in the ultimate lightweight package.   KBS Tour Steel progressive weight steel shafts are engineered with ‘moment of inertia’ analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.   KBS Tour V Steel is the newest KBS stepped shaft design. Though 10 grams lighter than KBS Tour, Tour V seeks to maintain similar flight characteristics. This is accomplished with a firmer tip section. It also has a high balance point which produces lower swing weights.   KBS Tour V Wedge was designed exclusively for wedges to produce shots with a lower-mid trajectory and mid ball spin. It has a firmer tip section and advanced taper rate.   KBS Tour Wedge the optimal shaft for proximity shots. The firmer tip section on the KBS WEDGE allows for less ball spin and increased control.   Model Flex Weight (g) Torque Kick Point KBS S-Taper S, S+, X 120, 125, 130 - - KBS S -Taper Lite R, S 110, 120 - - KBS C-Taper S, S+, X 120, 125, 130 - - KBS C-Taper Lite R, S, X 105, 110, 115 - - KBS HI-REV 2.0 Wedge R, S, X 115, 125, 135 - - KBS MAX Graphite 45, 55, 65 45, 55, 65 - - KBS PGI 70 R+ 70 4.0 Mid KBS PGI 80 S 80 3.5 Mid KBS PGI 90 S+ 90 3.0 High KBS TGI Tour Graphite Iron 60, 70, 80, 90, 95, 100 60, 70, 80, 90, 95, 100 - - KBS Tour Lite R, S, X 95, 100, 105 - - KBS Tour Steel R, S, X 110, 120, 130 - - KBS Tour V Steel R, S, X 100, 110, 120 - - KBS Tour V Wedge Wedge 125 - - KBS Tour Wedge R, S, X 110, 120, 130 - - Mitsubishi Mitsubishi MMT Taper Iron utilizes a patent pending Metal Mesh Technology (MMT) to redefine the possibilities for feel and performance in a composite iron shaft. A unique metal mesh – made from individually braided strands of 304 Stainless Steel – is integrated into the shaft’s prepreg layers towards the tip.   Mitsubishi MMT Scoring Wedge designed to provide uncompromising feel and spin from aggressive full shots to the most delicate scoring shots around the green.   Model Flex Weight (g) Torque Kick Point Mitsubishi MMT Taper 65 R 63 3.5 Mid Mitsubishi MMT Taper 75 S 74 3.7 Mid Mitsubishi MMT Taper 85 S 88 3.2 Mid Mitsubishi MMT Taper 105 TX 113 2.8 Mid/High Mitsubishi MMT Taper 125 TX 125 2.7 Mid/High Mitsubishi MMT Taper Iron 105 S 105 2.8 Mid Mitsubishi MMT Taper Iron 85 R 84 3.3 Mid Mitsubishi MMT Scoring Wedge 105 S 113 2.6 Mid Mitsubishi MMT Scoring Wedge 125 TX 130 2.6 Mid/High Nippon Nippon PRO MODUS3 750 GH designed for the better player that has a slower swing speed. The 750GH will promote a mid to high trajectory due to the unique structure that also creates a stable feeling.   Nippon NS Pro 850 GH enjoys rapidly growing popularity as an “attacking” shaft. These ultra-lightweight models feature easy contact thanks to their light weight and consistent directionality. What’s more, the full swings you enjoy as a result help provide the trajectory you want with crisp contact.   Nippon NS Pro 850GH Neo has been acclaimed around the world for its lightness, sharp swinging comfort, outstanding control performance and flight distance, it was developed with the ability to maximize the performance of the latest club heads.   Nippon NS Pro 950 GH Ever since its release, this top-selling model has been a favorite among golfers of all levels looking to take points off their scores. It features exceptional weight balance and control, with ultra-lightweight design comparable to graphite that makes it easier than ever to swing.   Nippon NS Pro 950GH Neo With the same light feeling as the 950GH steel shafts, the 950 NEO has been created to cater for larger iron head designs with strong lofts and lower center of gravities (CG) that have grown in popularity over the last 20 years.   Nippon NS Pro Modus Tour leverages Nippon’s expertise in lightweight steel shaft design to deliver a tour proven package from which many players can benefit. The traditional, smooth bend profile of medium stiffness provides mid flight with mid spin and signature Nippon feel.   Nippon NS Pro Zelos 6 created in pursuit of a lighter, stronger, more tenacious steel shaft that would satisfy for a lifetime. The remarkable light weight was achieved by combining our state-of-the-art matching technology with NZNS 60, an original ZELOS material.   Nippon NS Pro Zelos 7 light weight and strength have been mutually exclusive. Reducing the weight of steel has lowered its strength, increased the likelihood of breakage and reduced the pliability required to make dynamic shots.   Nippon NS Pro Zelos 8 employs newly developed, cutting-edge, high-intensity NZNS60 material that outperforms all other patented materials used in N.S PRO competitors steel shafts.   Model Flex Weight (g) Torque Kick Point Nippon NS Pro 750 GH R, S 79, 83 2.3, 2.1 Tip, Tip Nippon NS Pro 850 GH R, S 87, 91 2.1, 1.9 Mid, Mid Nippon NS Pro 850GH Neo R, S 84.5, 88 2.1, 2.0 - Nippon NS Pro 950 GH R, S 94.5, 98 2.0, 1.9 Mid, Mid Nippon NS Pro 950GH Neo S 98 1.7 Mid Nippon NS Pro Modus 3 Tour 105 R, S, X 106.5, 112 1.7, 1.6 Grip, Grip Nippon NS Pro Modus Tour 115 S, X 118.5, 119.5 1.6, 1.5 Grip, Grip Nippon NS Pro Modus Tour 120 S, X 114, 120 1.7, 1.6 Mid/High, Mid/High Nippon NS Pro Modus Tour 130 S, X 124, 129 1.5, 1.4 Mid, Mid Nippon NS Pro Zelos 6 S 68.5 3.0