Pine Block – Standard Axle Holes

**IMPORTANT – Read Before Ordering** Wheels and axles are not included with the blocks. If you need the block to have four wheels on the ground, or plan to use Awana axles, then in addition to the block you will need to add a standard option to the shopping cart. Benefits You will get top performance from these blocks! Precision Axle Holes – The axle holes are precision drilled to improve alignment and speed. Raised Axle Hole – The front-left axle hole is drilled slightly higher so that the car runs on three-wheels. Tests consistently prove that three-wheel cars are faster than four-wheel cars. Specifications The block measures: Height: 1-1/4″ Width: 1-3/4″ Length: 7″ The block is equipped with precision-drilled axle holes at the standard BSA position, and are drilled with a #44 bit (fits BSA axles). One front axle hole is slightly raised so that the car will ride on three wheels (best performance). Options The following standard options are available: Option 9000: Drilled axle holes, 4 wheels on the ground – add $1.00. Option 9002: Drilled axle holes for Awana axles (3/32″ bit) – add $1.00. Option 9003: Wedge Cut Block – add $2.00. Option 9004: Block Sliced Per Customer – add $2.00. A high quality pine block for your shaping pleasure! The block is equipped with precision-drilled axle holes at the standard BSA position. From Randy: “We use a precision drill press to ensure that axle holes are drilled as accurately as possible. This minimizes alignment issues, simplifying the building of a fast car.”