Pillar Machine | LARICK 230 Profile Sander

The Model 230 Profile Sander is a two spindle machine designed for use with flexible brush type sanding wheels. The machine is on caster and can be moved to the out feed end of a moulder, or above a conveyor, to sand parts as they exit the machine. 230 Profile Sander The 230 Series Profile Sander is a two spindle machine designed for use with flexible brush type sanding wheels. The spindles adjust individually, with vertical, horizontal, tilt and rotation. It can be placed at the outfeed end of a moulder, over a table, or used to sand free-hand. The spindle motors are controlled by inverters giving individual variable speed and sanding direction. The spindles on the Model 230 adjust individually to sand the top, bottom, front, or back of parts. In addition to the built in adjustment of the stands, the stands may slide forward/back on the base in addition to mounting the base higher or lower. Locking casters allow it to be rolled into position and locked in place. Machine Specifications Motors: (2) 1 HP 6 pole 3ph Voltage Model 232: 208-240V 1 or 3ph 50-60hz Model 234: 400-480V 3ph 50-60hz Variable Speed: AC Inverter, 100-1200rpm Arbor: 1.25” Dia., up to 10” Long Vertical Travel: 18” Footprint: 37.5” wide, 32” deep Dust Collection: (2) 3” round, 400cfm total