Pilgrim Custom Iron Series Fireplace Spark Guard

Ordering a Pilgrim Custom Fireplace Spark Guard Ordering custom items can be tricky. Here at NorthlineExpress.com we are going to simplify that process for you and point you in the right direction for ordering a Custom Fireplace Spark Guard. ⚠️Final price to be determined. Please call our dedicated support line for the total cost calculation for your custom order +1(724)-925-5110 Your Calculated Price will be based on: Price = Width x Height x .55 $616.99 Minimum Price Custom Screens are NOT eligible for Discounts or Promotions Structural Supports: Once the measurements equal to or are greater than 60" in width, or equal to or greater than 50" in height will require a horizontal support. Step 1 - Size: All you need for this one is a measuring tape. Starting with the width, measure your fireplace opening. Next go ahead and measure the height of the opening. Round up to the next whole inch. (Example: 35 1/2" Wide. Round it up to 36").We generally recommend that the screen is 2" wider and 1" higher than your fireplace opening. This gives you 1" all around the fireplace for adequate spark protection. Measure the width of the fireplace opening near the top and near the bottom. Measure the height from the bottom of the fireplace opening to the top of the opening on both sides. If the 2 widths and 2 heights do not match, use the widest and/or highest measurement. Custom screens can vary +/- 5/8'' unless a template is provided. Please Note: Added shipping charges may apply if the screen has a depth of more than the standard 6 1/2 inches. Custom sizes over 2300 square inches will be subject to an additional shipping charge since the screen must ship by semi-truck due to the size. Step 2 - Finish: The Pilgrim Custom FGN Series Fireplace Screen is available in 4 distinct finishes: Matte Black, Vintage Iron, Vintage Silver and Burnished Bronze. Please Note Finish applies to the frame only, mesh is standard black Matte Black Vintage Iron Vintage Silver Burnished Bronze Step 3 - Other Custom Options: Inside Fit - The custom fireplace screen has some optional features that you can select. First, the screen is available as an inside fit. Meaning the screen will fit inside your fireplace opening. A template is required when ordering the inside fit option. This template must be mailed in to us in order for us to build your custom screen. Please provide your contact info and sales order number when sending in. Structural Supports: Once the measurements equal to or are greater than 60" in width, or equal to or greater than 50" in height will require a horizontal support. Please note: Intended for Indoor use only.  All warranties are voided by Outdoor usage.