Icon Matte Black Faster Fusion Plastisol Ink

Icon Matte Black Fast Fusion Plastisol Ink | Low-Cure, Build-Up Resistant Icon Matte Black Fast Fusion Plastisol Ink is a premium plastisol ink designed for screen printing on all garment types, including cotton, 50/50 blends, and polyester. Formulated for a matte finish, it resists build-up during wet-on-wet printing and features a silky-smooth, low-viscosity texture for faster, more productive prints. On automatic presses, it allows lower pressure settings to extend screen longevity. Key Features: Ready to Use: Usable directly from the container, though stirring is recommended before printing. Wet-on-Wet Printing: Resistant to build-up. Versatile Fabric Compatibility: Suitable for 100% cotton, 50/50 polyester blends, and most other blends. Fast Flashing and Low Curing: Supports quick production (2–5 seconds flash time) and cures between 295–310°F. Curing Instructions: Flash at approximately 220°F for 3–5 seconds and cure at 295–310°F. Cleanup and On-Press Color Changes: Use a press wash for on-press color changes and an ink degradant for removal. The stencil can be saved or the entire screen printing frame reclaimed. Storage Instructions: Store at room temperature, away from direct sunlight and extreme heat (below 95°F). Best used within one year of the manufacturing date. Additional Features and Tips: Finish: Matte Stencils: Compatible with all direct emulsion or capillary film types Opacity: Highly opaque Wash-Up: Use Thinner DT or conventional plastisol wash-up systems Bleed Resistance: Excellent, ideal for polyester Ink Build-Up on Screen: Minimal Mileage: Approximately 800–1,750 sq. ft. per gallon Drying: 295–310°F Fabrics: Suitable for all fabric types; use 196–305 monofilament for soft-hand coverage Note: Always pretest to confirm suitability and establish procedures before production. Stir plastisols before each use. Avoid dry cleaning, bleach, or direct ironing.