Peavey AQ 12" Speaker With Bluetooth

Call for details. 704-781-5600 The Peavey Aquarius AQ series speaker enclosures represent the best combination of reliability, performance and value in the market today. Using our 50 plus years of experience and custom components, the AQ series represents an evolution of speaker technology no other company can offer. The AQ represents an increase in power, both in output and reliability from previous designs while increasing efficiency, using less power to create more output making our products environmentally friendly. Sonically our components are world-class. Our Asymmetrical Quadratic Waveguide horn allows us to direct the existing energy more precisely. This makes our enclosures perform better by getting more output where it's needed in addition to having a cleaner, clearer sound than our competition. Safety is a number one concern; our enclosures are tested and certified for sale all over the world to be safe and reliable in a number of environments. Modern features like Bluetooth audio streaming and the ability to pair another speaker make our speakers convenient as well as being sonically superior. Advanced DSP gave our engineers the ability to design several presets that quickly modify the enclosure's dynamics and EQ for various applications. Efficient, easy to use, modern, reliable, and now with reduced weight, the AQ series is the best value in the business. Dare to compare our enclosures to any in its category and you will find a sonically superior, more reliable, and higher output enclosure. Two-way bi-amplified analog amp powered speaker system 12" heavy-duty woofer DX™14 compression driver, with 1.4 inch titanium diaphragm 670 watts peak dynamic woofer power, 330 watts peak dynamic tweeter power Bluetooth® streaming and pairing are supported DSP processing is 56 bit double-precision DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components Dynamic bass boost function Fan cooled for maximum reliability Peavey® Designed Quadratic Throat Waveguide™ technology, 110 by 80 degree coverage Input is via a combo female XLR and 1/4" TRS phone jack with balanced input OR a Bluetooth ® signal can be streamed to the speaker system. Mic/Line switch to accommodate a wide range of input signals Thru/Mix output is via a male XLR jack Multiple Factory Preset EQ settings for the DSP crossover system Rugged plastic injection-molded trapezoidal enclosure Cabinet has dual rear corner angled sides for floor monitor use. Full-coverage perforated steel grille, with powder coat finish Pole mount molded-in for 1 3/8" diameter poles Packed Weight: 40.35 lb (18.3 kg) Packed Length: 28.25" (71.75 cm) Packed Width: 16.375" (41.59 cm) Packed Height: 16.125" (40.96 cm) Frequency Response 68 Hz to 19 kHz, +/- 6 dB, anechoic environment Usable Low Frequency limit (-10 dB point anechoic) 55 Hz Nominal sensitivity (1W @1M, swept sine input in anechoic environment) 95 dB (average) Maximum Sound Pressure Gain (1 meter) 125 dB SPL peak with music Radiation Angle measured at -6 dB point of polar response Nominal: 110 degrees horizontal X 80 degrees vertical (Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to straight ahead being +30, -50 degrees) Transducer Complement Heavy-duty 12” woofer with 2” voice coil & 44 oz. magnet DX™14 1.4” titanium diaphragm dynamic compression driver Box Tuning Frequency 52 Hz Electroacoustic crossover frequency 1.9 kHz Crossover type Internal Electronic DSP based two-way crossover with driver EQ, level matching, bass boost, limiting and subsonic filtering. Crossover Slopes Linkwitz-Riley 24 dB/octave (4th order) low pass, 24dB/octave (fourth order) high pass, both with driver EQ incorporated. Input Connections One combo female XLR / 1/4” phone jack providing balanced line-level operation from the 1 / 4” jack section, and the XLR section. Bluetooth® input via wireless link, with pairing options. Output Connections One male XLR jack. The Thru/Mix jack is intended for the use of linking multiple AQ™12‘s in a line or to provide a feed to a powered subwoofer, or other electronics that needs to receive a full range version of the input signal. The Mix function converts this jack to provide a mixed signal of the input jack and the Bluetooth® source. Enclosure Materials & Finish Black injection-molded plastic with textured surface, black powder-coated perforated full-coverage grille Mounting provisions Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup with industry standard 1 3/8” inside diameter for use with subwoofer poles and speaker stands is on the bottom. Unit is not designed to be flown overhead.