Peakworks Permanent Anchorage with 1/2" Hole (V8221111)

Peakworks Permanent Anchorage with 1/2" Hole Model Number: V8221111 Features: A complete fall arrest system requires three primary components: approved full body harness, connector and anchorage connector Anchors can be connected to a variety of materials such as steel, wood and concrete PeakWorks offers a wide range of anchor systems including: single-use/reusable roof anchors, sliding beam anchors, concrete hole anchors and permanent anchors The anchor should be located directly above the worker to prevent swinging The height of an anchor is a key variable when determining fall clearance As with all fall protection products, anchors must be inspected by a competent person at a minimum annually All PeakWorks anchors are built with a minimum tensile strength of 5,000 lb (22 kN) All PeakWorks anchors meet or exceed CSA Z259.15 and ANSI Z359.18 standards and OSHA requirements 310-lb (141-kg) capacity for 1 worker (combined weight of person, tools, clothing, etc.) Specifications: Quantity: 1 Mod. No.: CP-10011-1 Application: Permanent Size: 1/2" (13mm) Hole NOTE: California Residents – Proposition 65 Warning. For more information, visit www.p65Warnings.ca.gov