PCE RT 2300 23 Parameter Profilometer Surface Roughness Tester

Highlights: Portable Material tester for the rapid detection of roughness (Ra, Rz, Rq, Rt and many more) Detachable motor unit Touch screen Interface Range of 320 µm or 12.6 mil The PCE RT 2300 23 Parameter Profilometer Surface Roughness Tester is used to measure the roughness of surfaces. It has a removable motorized sensor which makes it possible to determine the surface profile roughness even on small or narrow profiles. The measured values ??are displayed on a large LCD display of the profilometer. The device is powered by an internal battery or it can be powered by a conventional USB power adapter. The detachable motorized sensor is connected by a cable to the main unit of the profilometer gauge. The diamond stylus is installed in the motorized sensor. This presses with a maximum force of 4 mN on the surface from which the roughness profile is to be measured. The profilometer measures according to the valid ISO, ANSI and JIS standards for profilometer measuring instruments. Features: Touchscreen interface and PC connection Measurement of all roughness profile values Battery and mains operation Different filters adjustable Diamond test head Removable motorized sensor Large measuring range: Rz: 0.02 µm - 320 µm; Ra, Rq: 0.005 µm - 32 µm Specifications: Measuring range: Rz: 0.02 µm ... 320 µm; Ra, Rq: 0.005 µm ... 32 µm, Rz = 320µm (-160µm~160µm) / 12600µin (-6300µin~+6300µin) Accuracy: ± 10% Repeatability: ± 6% Resolution: ± 20 µm: 0.01 µm ± 40 µm: 0.02 µm ± 80 µm: 0.04 µm Measurement Parameters: Ra, Rz, Rq, Rt, Rc, Rp, Rv, R3z, R3y, Rz (JIS), Ry, Rs, Rsk, Rku, Rmax, Rsm, Rmr, RPc, Rk, Rpk, Rvk, Mr1, Mr2 Measurement Standards: ISO4287, ANSI b46.1, DIN4768, JISb601 Graphic: Primary profile (roughness + waviness) Roughness profile (roughness) Loading curves Measuring filter: RC, PC-RC, Gaus, DP Measuring section (Cut Off): 0.25 mm, 0.8 mm, 2.5 mm Measuring length: 1 ... 5* measuring path. Max. 17.5 mm (including pre- and post-run) Sensor: Diamond probe tip 90° cone angle. 5 µm Contact force sensor: <4 mN Feed rate: 0.25 mm: 0.135 mm / s 0.8 mm: 0.5 mm / s 2.5 mm: 1 mm / s Display: 3.5" LCD screen Power supply: 3.7V Li-Ion Battery. 5V / 800-mA USB Power Adapter Operating time: 50 h Operating conditions: -20 ... 40°C / -4 ... 104°F, max. 90% rh Storage conditions: -40 ... 60°C / -40 ... 140°F, max. 90% rh Dimensions: Main unit: 158 x 55 x 52 mm / 6.2 x 2.2 x 2 in Motor unit: 115 x 23 x 27 mm / 4.5 x 1 x 1.1 in Weight: About 500 g / 1.1 lbs What’s included: 1 x Profilometer PCE-RT 2300 1 x Microprobe 1 x Removable motorized sensor 2 x Connection cable for motor unit 1 x Charger 1 x Interface cable 1 x Transport case 1 x Manual  PCE-RT 2300 User Manual PCE-RT 2300 Data Sheet  Need more info? Please contact us or go to the PCE Resource Center.