PCAN-USB X6 Adapter

The new 6-channel CAN FD adapter from PEAK-System, PCAN-USB X6, enables the connection of CAN FD and classic CAN networks to a computer via a single USB interface. Delivered in a robust aluminum housing and available with either SUB-D9 style or M12 connectors for each CAN channel this multi-channel CAN adapter is suitable for use in harsh environments. The PCAN-USB package includes device drivers for Windows® 11 (64-bit) and 10 (32/64-bit), the PCAN-Basic API, and the PCAN-View CAN monitor software. Linux drivers are also available. For customers needing more sophisticated CAN Analyzing software we have PCAN-Explorer 6. Features Tech Specs Documents Downloads Adapter for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0) 6 High-speed CAN channels with exchangable NXP TJA1044GT transceiver modules. Alternative transceivers with galvanic isolation up to 300 V on request Complies with CAN specifications 2.0 A/B and FD CAN FD support for ISO and Non-ISO standards switchable CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s CAN bit rates from 25 kbit/s up to 1 Mbit/s Time stamp resolution 1 µs FPGA implementation of the CAN FD controller Status LEDs for CAN channels, USB upstream, and power supply CAN connection via D-Sub, 9-pin or M12 circular connectors, 5-pin (pin assignment of both connectors in accordance with CiA® 303-1) Aluminum casing with increased Ingress Protection (special order item with part number IPEH-004063) High-speed USB 2.0 downstream port (only for IPEH-004062) CAN termination can be activated through a solder jumper, separately for each CAN channel Measurement of bus load including error frames and overload frames on the physical bus Induced error generation for incoming and outgoing CAN messages Voltage supply from 8 to 30 V Extended operating temperature range from -40 to 85 °C (-40 to 185 °F) Interface(s) USB Upstream: USB plug type A, high-speed USB 2.0 (compatible to USB 1.1 and 3.0) USB Downstream: USB plug type A, high-speed USB 2.0 (compatible to USB 1.1 and 3.0), max. current output 500mA CAN: CAN FD 1.0 (compatible with CAN 2.0) ISO 11898-2, complies with CiA-recommendation DS 102 Power Consumption USB 5V max. 350 mA (w/o USB device on downstream connection) Baud Rate CAN 2.0: 40 kBit/s ... 1 MBit/s CAN FD: 40 kBit/s ... 12 MBit/s Pinout C.I.A. DS-102 (CAN_H = 7, CAN_L = 2, CAN_GND = 3) Transceiver NXP TJA1044GT Dimensions 170 x 93 x 65 mm (without connection cable) Weight 550 g (w/o cable) PCAN-USB X6 Manual PDF User's Manual in English Device driver setup for Windows Installation package from PEAK-System for device drivers and tools for Windows ® 10, 8.1 (32/64-bit) for our PC interfaces. Tools included: PEAK-CPL, PCAN-View, PLIN-View Pro and Virtual PCAN-Gateway. Device drivers for Linux Device driver for PEAK CAN interfaces from Kernel 2.6. PCAN-USB X6 firmware Firmware package PCAN-View Software for displaying, sending and recording CAN and CAN FD messages for Windows ® 10, 8.1 (32/64-bit). PCAN-Basic API API for developing applications with CAN and CAN FD connections for Windows ® 10, 8.1 (32/64-bit). PCAN-Basic API (Linux) API for developing applications with CAN connection for Linux. PCAN-CCP API API for developing software for communication with control units according to the CAN Calibration Protocol (CCP) for Windows ® 10, 8.1 (32/64-bit). PCAN-XCP API API for developing software for communication with ECUs in accordance with the Universal Measurement and Calibration Protocol (XCP) for Windows ® 10, 8.1 (32/64-bit). PCAN-ISO-TP API API for the transmission of data packets according to ISO-TP (ISO 15765-2) for Windows ® 10, 8.1 (32/64-bit). PCAN-UDS API API for communication with control units according to UDS (ISO 14229-1) for Windows ® 10, 8.1 (32/64-bit). PCAN-OBD-2 API API for vehicle diagnosis according to OBD-2 (ISO 15765-4) for Windows ® 10, 8.1 (32/64-bit). PCAN-PassThru API Pass-Thru API and connection of Pass-Thru software to PEAK-CAN interfaces. Installation for Windows ® 10, 8.1 (32/64-bit) including interface DLLs, configuration software, PCAN-Basic API and PCAN-ISO-TP API. Documentation included in the download.