PCAN-USB Pro FD Adapter

The new CAN FD Pro from PEAK-System, PCAN-USB Pro FD adapter enables the connection of CAN FD and LIN networks to a computer via USB. Two field busses can be connected at the same time, up to four with appropriate adapter cables (2 x CAN FD, 2 x LIN). Each CAN FD channel is separately isolated against USB and LIN with a maximum of 500 Volts. Its robust aluminum casing makes the PCAN-USB Pro FD adapter suitable for mobile applications. The PCAN-USB package includes device drivers for Windows® 11 (64-bit) and 10 (32/64-bit), the PCAN-Basic API, and the PCAN-View CAN monitor software. Linux drivers are also available. For customers needing more sophisticated CAN Analyzing software we have PCAN-Explorer 6. Features Tech Specs Documents Downloads Transmitting and receiving of CAN FD and LIN messages using 2 D-Sub connections (both with pin assignment for the CAN FD and LIN bus) Adapter for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0) Time stamp resolution 1 μs 5-Volt supply at the D-Sub connector can be activated through a solder jumper, e.g. for external bus converter Voltage supply via USB Extended operating temperature range from -40 to 85 °C (-40 to 185 °F) CAN operation properties: FPGA implementation of the CAN FD controller Complies with CAN specifications 2.0 A/B and FD 1.0 CAN FD bit rates for the data field (64 bytes max.) from 40 kbit/s up to 12 Mbit/s CAN bit rates from 40 kbit/s up to 1 Mbit/s NXP TJA1044GT CAN transceiver Each CAN FD channel is separately opto-decoupled against USB and LIN up to 500 V CAN termination can be activated through a solder jumper Measurement of bus load including error frames and overload frames Induced error generation for incoming and outgoing CAN messages LIN operation properties: Bit rates from 1 kbit/s up to 20 kbit/s TJA1021/20 LIN transceiver Both LIN channels (common ground) are optodecoupled against USB and CAN FD Can be used as a LIN master or slave (1 ms master task resolution) Automatic bit rate, frame length, and checksum type recognition Autonomous scheduler with support for unconditional, event, and sporadic frames Hardware can work through a schedule table (up to 8 schedule tables can be configured with a total of 256 slots) Interface(s) PC: USB plug type A, high-speed USB 2.0 (compatible to USB 1.1 and 3.0) CAN/LIN: CAN FD 1.0 (compatible with CAN 2.0) ISO 11898-2, complies with CiA-recommendation DS 102 Power Consumption USB 5V max. 200 mA Baud Rate CAN 2.0: 40 kBit/s ... 1 MBit/s; CAN FD: 40 kBit/s ... 12 MBit/s LIN: 1 kbit/s – 20 kbit/s Pinout C.I.A. DS-102 (CAN_H = 7, CAN_L = 2, CAN_GND = 3) Enclosure IP20 Transceiver CAN: TJA1044GT; LIN: TJA1021/22 Dimensions 114 x 71.5 x 24 mm (without connection cable) Weight 220 g (with USB cable) Software Driver: Windows® 10, 8.1, 7 and Linux Tools: PCAN-View for Windows®, PLIN-View Pro Isolation 500 VDC Controller(s) FPGA Implementation Connector(s) USB Timestamp Resolution 1 microsecond Specification CAN/LIN: CAN FD 1.0, CAN 2.0A (Standard format) and 2.0B (extended format) , LIN specification 2.1 Operating temperature -40°C to +85°C Storage temperature -40°C to +100°C Relative humidity 15% to 90% (non-condensing) EMC directives EN 55024:2011-09 EN 55022:2011-12 EC directive 2004/108/EG Certifications CE, RoHS PCAN-USB Pro FD manual User's Manual in English Device driver setup for Windows Installation package from PEAK-System for device drivers and tools for Windows ® 10, 8.1 (32/64-bit) for our PC interfaces. Tools included: PEAK-CPL, PCAN-View, PLIN-View Pro and Virtual PCAN-Gateway. Device drivers for Linux Device driver for PEAK CAN interfaces from Kernel 2.6. PCAN-USB Pro FD firmware Firmware upgrade PCAN-View Software for displaying, sending and recording CAN and CAN FD messages for Windows ® 10, 8.1 (32/64-bit). PCAN-Basic API API for developing applications with CAN and CAN FD connections for Windows ® 10, 8.1 (32/64-bit). PCAN-Basic API (Linux) API for developing applications with CAN connection for Linux. PLIN-API API for the development of applications with LIN connection for Windows® 11 (64-bit), 10 (32/64-bit). PCAN-CCP API API for developing software for communication with control units according to the CAN Calibration Protocol (CCP) for Windows ® 10, 8.1 (32/64-bit). PCAN-XCP API API for developing software for communication with ECUs in accordance with the Universal Measurement and Calibration Protocol (XCP) for Windows ® 10, 8.1 (32/64-bit). PCAN-ISO-TP API API for the transmission of data packets according to ISO-TP (ISO 15765-2) for Windows ® 10, 8.1 (32/64-bit). PCAN-UDS API API for communication with control units according to UDS (ISO 14229-1) for Windows ® 10, 8.1 (32/64-bit). PCAN-OBD-2 API API for vehicle diagnosis according to OBD-2 (ISO 15765-4) for Windows ® 10, 8.1 (32/64-bit). PCAN-PassThru API Pass-Thru API and connection of Pass-Thru software to PEAK-CAN interfaces. Installation for Windows ® 10, 8.1 (32/64-bit) including interface DLLs, configuration software, PCAN-Basic API and PCAN-ISO-TP API. Documentation included in the download.