PCAN-MicroMod Mix 3

The motherboards for the PCAN-MicroMod provide an application-oriented environment. Typical characteristics of this product group include a wide supply voltage range and the protective circuit for the inputs and outputs. CANopen® firmware is available for all PCAN-MicroMod motherboards. The Mix 3 motherboard allows the use of all inputs and outputs available on the PCAN-MicroMod, which opens up a wide range of potential applications in the automotive and industrial sectors. Features Tech Specs Documents Downloads Completely configurable using the Windows® software PCAN-MicroMod Configuration Communication through High-speed CAN Operating voltage 12 V DC nominal, 8 - 26 V possible Plastic casing with Tyco automotive connectors Extended operating temperature range from -40 to 85 °C (-40 to 185 °F) 8 analog inputs with the following properties: Measuring range unipolar 0 – 4.1 V (can be expanded using resistive dividers) Resolution 10 bit, sample rate 1 kHz Protection against voltage dips and surges Low pass behavior 8 digital inputs with the following properties: Schmitt trigger behavior (Vh = 4 V, Vl = 2,5 V) Voltage level difference 5 - 18 V Pull-up or pull-down switching can be set for each channel Low pass behavior 4 frequency inputs (differences to the digital inputs): Scanned frequency range 0 – 10 kHz 8 digital outputs with the following properties: High-side drivers, 350 mA continuous current, 500 mA short-circuit current 4 outputs switchable in low-side drivers, 700 mA continuous current, 1 A short-circuit current Short-circuit protection 4 PWM/frequency outputs with the following properties: Low-side drivers, 350 mA continuous current, 1 A short-circuit current 2 outputs switchable to high-side drivers, 1,5 A continuous current, 5 A short-circuit current Short-circuit protection Power Supply Voltage supply VBat motherboard: 12 V DC nom., 8 - 26 V possible Voltage supply VHSout high-side drivers: 12 V DC nom., 8 - 33 V possible Current consumption: 60 mA at 12 V on VBat (all outputs passive) Digital Inputs Count: 8 Input voltage Low: < 3.2 V Input voltage High: > 4.0 V Maximum input voltage: 18 V Circuit: open (130 kΩ, weak pull-down), pull-up (4.7 kΩ), pull-down (4.7 kΩ) Further properties: Schmitt trigger behavior, inverting Digital Outputs Count: 8 Circuit: High-side switch, 4 outputs alternatively configurable as low-side switch, Short circuit protection Constant current: High-side: max. 350 mA; Low-side: max. 700 mA Short-circuit current: High-side:500 mA; Low-side: 1 A Analog Inputs Count: 8 Measuring range: 0 - 4.1 V, unipolar, extensible through voltage divider with resistors Resolution: 10 bit Input impedance: 100 kΩ (at measuring range 4.1 V) Source impedance: < 5 kΩ Sample rate: 1000 samples/s Low-pass: τ = 2.5 ms Further properties: Pull-down circuit, Protection against under voltage and over voltage Frequency/PWM outputs Count: 4, can be used as 4* PWM outputs 8-bit, or 2* PWM outputs 16-bit, or 2* frequency outputs Circuit: Low-side switch, 2 outputs alternatively configurable as high-side switch, short circuit protection Constant current: Low-side: max. 350 mA; High-side: max. 1.5 A Short-circuit current: Low-side:1 A; High-side: 5 A Maximum frequency: Low-side: 10 kHz; High-side: 1.5 kHz CAN Transmission standard: High-speed CAN ISO 11898-2, typ. 500 kbit/s, setup with PCAN-MicroMod Configuration (Windows software) Termination: none CAN ID reserved for configuration transfer: 0x7E7 Module number at delivery (for configuration transfer): 0 Dimensions 100 x 60 x 27 mm, see User's Manual for more details - Casing size (incl.connectors) Weight 100 g Operating temperature -40 - +85 °C (-40 - +185 °F) Storage temperature -40 - +100 °C (-40 - +212 °F) Relative humidity 15% to 90% (non-condensing) Ingress protection (IEC 60529) IP20 EMC DIN EN 61326-1:2008-06, EC directive 2004/108/EG PCAN-MicroMod Mix 3 manual User's Guide in English PCAN-MicroMod CANopen® firmware manual CANopen Firmware Manual in English PCAN-MicroMod package The package includes the configuration software PCAN-MicroMod Configuration for Windows®, the latest PCAN-MicroMod and the CANopen® firmware, all files for development, and documentation (German and English) PCAN-MicroMod Configuration PCAN-MicroMod Configuration software for Windows® 10, 8.1, 7 (32/64-bit)