PAVER SEAL

EXCELLENT ON CONCRETE PAVERS! WATER BASED • Seals Pavers, Porous Tile, Saltillo & More  • Leaves a Clear "Satin" Look Finish • Resists Stains • Bonds the Joint Sand Between Pavers • Will Not Yellow, Crack or Peel • UV Protection LayorCare Paver Seal (Water Based) - 1 Gallon covers up to 300-600 sq ft*   Ideal for all types of pavers, porous tile, saltillo and more. Unique formula combines with sand or concrete to seal pores and prevent pitting. Excellent for bonding joint sand between pavers. Won’t crack, yellow or peel and offers UV protection. Lasts up to 3 years!   • Allow newly grouted surfaces to cure for 48 hours before applying. • Depending on existing surface, clean area to be sealed with LayorCare’s Pre-Treat Cleaner or Heavy Calcium Releaser if calcium or efflorescence is present. • Rinse area and let dry completely. • For brick pavers apply immediately after installation. • Paver Seal will bond the joint sand between the pavers to help prevent weather erosion. • Apply Paver Sealer with brush, roller or airless sprayer. • Always use full strength--DO NOT DILUTE. • Two coats are recommended. Allow to dry to touch before applying additional coats. • Surface can be walked on after 3 hours. • Let cure for 24 hours before applying standing water. (fountain, pool, spa) • Product covers approximately 300-600 sq ft per gallon per single coat application. • Paver Seal lasts up to 3 years when properly maintained!   Available in Gallons and 2.5 Gallons.  (*all sq ft coverage is approximate)