Patco 8300 - Clear Aircraft Exterior Protective Tape

Patco 8300 Specialty Masking & Protection Clear, polyurethane acrylic kraft paper. Extremely tough and conformable. Transparent outdoor polyurethane film with a very aggressive acrylic adhesive. This product provides excellent protection from abrasion, ultraviolet light and rain erosion resistant. Stays clear, allows for visual inspection. Protect surfaces and adds longer application life. High adhesion and long aging. Sticks well to many surfaces and adds longer application life. Will not lift, stain or dry out. Excellent lay-flat and dimensional stability. Aircraft leading edge surfaces on wings, stabilizers, struts and landing gear. Any metal plastic or composite surface requiring protection from abrasion, ultraviolet light or rain erosion. Specifications: Fokker Fk05-193 Technical Data: Patco 8300 Tech Data Sheet Patco 8300 Safety Sheet Liner Kraft Paper Adhesive Acrylic Backing/Carrier Polyurethane Color Clear Features Extremely tough and conformable transparent outdoor polyurethane film with a very aggressive acrylic adhesive. This product provides excellent protection from abrasion, ultraviolet light and rain erosion. Non-yellowing and abrasion resistant. Stays clear, allows for visual inspection. Protect surfaces and adds longer application life. High adhesion and long aging. Sticks well to many surfaces. Will not lift, stain or dry out. Excellent lay-flat and dimensional stability. Applications Aircraft leading edge surfaces on wings, stabilizers, struts and landing gear. Any metal plastic or composite surface requiring protection from abrasion, ultraviolet light or rain erosion. Construction Single Coated with Liner Market Aerospace Brand Patco Thicknes 14.5mils 0.368mm  PSTC-133 Substrate thickness 12.0mils .305mm PSTC-133 Adhesion to Steel 110 oz/in 12.03 N/cm ASTM D-3330 Tensile 80 lb/in 140.10 N/cm ASTM D-3759 Puncture resistance 40 lb 18.14 kg ASTM D-1000 Elongation 500% Weight 12.50 oz/yd^2 423.82 g/m^2 Application temperature 50 – 120F 10 – 49C Operating temperature -40 – +275ºF -40 – +135ºC       Additional Information   Nominal Tape Widths vs Actual Widths Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples: 1" Nominal width = 15/16" (24mm) Actual width 2" Nominal width = 1-7/8" (48mm) Actual width 3" Nominal width = 2-13/16" (72mm) Actual width Note that tape rolls are NOT guaranteed to be splice-free.