Paint Mixer, Positive or Negative Helix

Paint Mixer Zinc Plated - Available in multiple wheel diameters    The Groz Paint Mixers mix a variety of low to high density materials such as paint and varnish. These mixers are manufactured from two pieces; the mild steel rod and the blade and base made from cold rolled steel sheet. The entire piece has a white zinc plated finish for increased protection against rust. The mixers with the Positive Helix is ideal for mixing low to medium viscosity material. The mixer with the Negative Helix is ideal for mixing medium to high viscosity material.   Catalog Page   How to Use the Paint Mixer Place Paint Mixer in the container and gently work around the container edges till the material starts flowing towards the center of the blades. Continue to gently work on the material till it is of desired consistency. For coarse or stiff materials, reverse the direction of the drill and follow above steps. The mixer works best with a variable speed reversible drill machine with 400 – 600 watts minimum power. Recommended speed between 200 – 700 RPM depending upon the material being mixed. Important Do NOT use the Paint Mixer with lacquer or other such inflammable liquids (with flashpoint under 70°F). Insert mixer well into the material before turning on the drill. When mixing is complete, wait for the mixer to come to a halt before removing it from the container.