HPE 6.4TB SAS 12G Mixed Use SFF Solid State Drive – P19919-B21

BRAND NEW FACTORY SEALED & RETAIL BOXED WITH THE FULL HPE WARRANTY!!! Overview The HPE P19919-B21 is a 6.4TB Mixed Use Solid State Drive (SSD) designed for enterprise server and storage environments requiring high-capacity solid-state storage, performance, and endurance. It features a 12Gb/s SAS interface, 2.5-inch Small Form Factor (SFF) design, and an HPE Smart Carrier. The drive is part of the HPE Mixed Use SSD product line and is designed for workloads requiring a combination of read and write operations. Its SAS connectivity provides high-speed data transfer for compatible HPE ProLiant servers and storage platforms. Key Features Genuine HPE enterprise SSD 6.4TB storage capacity Mixed Use workload classification SAS 12Gb/s interface 2.5-inch Small Form Factor (SFF) HPE Smart Carrier included Hot-swap support 1.2GBps data transfer rate NAND Flash technology Designed for compatible HPE ProLiant servers and storage platforms Factory sealed and retail boxed Full HPE warranty Technical Specifications Brand: HPE Manufacturer: Hewlett-Packard Part Number / SKU: P19919-B21 Product Line: HPE Mixed Use Product Type: Solid State Drive Storage Capacity: 6.4TB Workload Type: Mixed Use Storage Interface: Serial Attached SCSI 3 Interface: SAS 12Gb/s Data Transfer Rate: 1.2GBps Drive Type: Hot-Swap Hard Drive Form Factor: 2.5-inch SFF Form Factor (Metric): 6.4 cm SFF Compatible Bay: 2.5-inch SFF Bundled With: HPE Smart Carrier Packaged Quantity: 1 Physical Specifications Form Factor: 2.5-inch SFF Form Factor (Metric): 6.4 cm SFF Compatible Bay: 2.5-inch SFF Drive Type: Hot-Swap Carrier: HPE Smart Carrier Capacity: 6.4TB Storage Technology The HPE P19919-B21 uses NAND Flash technology to provide solid-state storage without the mechanical components found in traditional hard disk drives. This enables improved storage responsiveness, lower latency, and greater power efficiency compared with traditional rotating media. The drive is categorized as a Mixed Use (MU) SSD, making it suitable for workloads that require both read and write operations. SAS 12Gb/s Interface The P19919-B21 uses a 12Gb/s SAS interface, providing high-speed connectivity for compatible enterprise server and storage configurations. The listed data transfer rate is 1.2GBps. SAS connectivity is designed for enterprise environments where reliability, performance, and compatibility with supported storage controllers are important. Smart Carrier and Hot-Swap Design The drive is bundled with an HPE Smart Carrier and features a hot-swap drive configuration for compatible systems. The Smart Carrier helps provide drive-status information and supports easier drive management in supported HPE server environments. Actual hot-swap functionality depends on the specific HPE server, storage controller, firmware, and configuration. Compatibility The HPE P19919-B21 is designed for compatible HPE ProLiant servers and HPE storage platforms that support 2.5-inch SFF SAS SSDs. Compatibility should be verified against the exact HPE server or storage model, storage controller, drive bay, firmware, and configuration before installation. Benefits Provides 6.4TB of enterprise solid-state storage High-speed SAS 12Gb/s connectivity Mixed Use design supports combined read/write workloads 2.5-inch SFF form factor HPE Smart Carrier included Hot-swap support for compatible configurations 1.2GBps listed data transfer rate NAND Flash technology Suitable for enterprise server and storage environments Designed for compatible HPE infrastructure Ideal Applications Enterprise server storage Data center environments Database applications Virtualization Mixed read/write workloads Business-critical applications Enterprise storage upgrades HPE ProLiant server environments HPE storage platforms High-capacity enterprise storage Why Choose HPE P19919-B21 Genuine HPE enterprise SSD 6.4TB storage capacity SAS 12Gb/s interface Mixed Use workload classification 2.5-inch SFF form factor HPE Smart Carrier included Hot-swap drive design 1.2GBps data transfer rate NAND Flash technology Designed for compatible HPE server and storage platforms Full HPE warranty FAQs What is the storage capacity of the HPE P19919-B21 SSD? The HPE P19919-B21 provides 6.4TB of solid-state storage capacity. What interface does the HPE P19919-B21 use? The drive uses a 12Gb/s SAS interface with a Serial Attached SCSI 3 storage interface standard. What type of workload is the HPE P19919-B21 designed for? The P19919-B21 is an HPE Mixed Use (MU) SSD, making it suitable for workloads involving a combination of read and write operations. What is the form factor of the HPE P19919-B21? The SSD uses a 2.5-inch Small Form Factor (SFF) design and is compatible with 2.5-inch SFF drive bays. Does the HPE P19919-B21 support hot swapping? Yes. The drive is specified as a hot-swap hard drive and is supplied with an HPE Smart Carrier. Actual hot-swap functionality depends on the supported HPE system configuration. What is the data transfer rate of the HPE P19919-B21? The HPE P19919-B21 has a listed data transfer rate of 1.2GBps and uses a 12Gb/s SAS interface.