OVAL QUICK LINKS

Quick links A quick link is a lighter, smaller connector than a carabiner; but at the same size it is much stronger. The quick link is a perfect connector for anything that is meant to be permanently installed rather than opened and closed repeatedly.  Oval Quick links of galvanized steel These quick links are made of steel and are galvanized to prevent corrosion and oxidation when installed in humid environments. In the case of salty marine environments, it is necessary to choose stainless steel rather than galvanized steel quick links.   OVAL Quick links Designed to work in linear loads; these quick links are an alternative to carabiners and an excellent connector inside a pulley system or for a Highline set-up. Available in a twisted version to connect elements rotated by 90°. Frequent uses: To connect a static rope with a knot to a fixed part of a pulley system To connect to an anchor plate To connect a static rope to anchor bolts for a Highline set-up. (In the case of a round sling, it is recommended to use Delta quick links) To connect the backup line of a highline to the splits(T-Loop or Fractio) To connect the sewn loops of a main highline Occasional use: To connect a round sling spanset to a pulley or to a line lock Together with a shackle it can become the lock pin of a linelock for a ground slackline DO NOT use: Tricklines To equalized slings for in tri-load set-up Warnings Always check if you have closed the quick links before use. If you forget closing, they may bend quickly when under tension. For a permanent safety lock, they must be closed with a wrench. It is possible to use tape around the quick link if you intend to increase safety by leaving them permanently locked. Finger pressure strength is sufficient to use as a semi-permanent connector. When you have finished using it, keep the quick link screw closed even when at rest. In fact, in the case of non-use over a long period, with exposure to open air, dust or atmospheric agents, the nut could get stuck permanently.