Flex Paste Flood Protection

The Flex Seal Family of Flood Protection Products are specifically designed to work TOGETHER to create multiple layers of super-strong, waterproof protection, and to be easily removed after floodwaters recede. They can help slow down or even stop water from entering structures. Flood Protection Paste is the primary Flood Protection product and should be used as a base coat for your first layer of protection. It starts out as a thick paste that can be pushed deep into all types of openings and hard-to-reach areas. It dries to a strong, flexible, rubberized barrier. It seals out water, air, and moisture and remains completely flexible. Available in a Cartridge and Wrapped Sleeves. WARNING: California Proposition 65 Notice. Flood Protection in a Cartridge Features a has a precision nozzle that allows you to target specific areas that need to be sealed. Use on windows, doors, garage doors, and all types of seams, casings, thresholds, conduits, vents and ducts, keyholes, and more. Flood Paste in a Wrapped Sleeve Designed for use on larger areas, flat surfaces, or directly on top of our other Flood Protection products and is applied with a putty knife. Use on basement widows, pet doors, crawlspaces, seams, windowsills, foundation cracks, and more. For complete instructions, visit flexsealproducts.com/flood. We’re proud to say that when used in combination, and as directed, our Flood Protection Products have been independently verified by UL Solutions to hold back 3ft of water for 14 days on gaps up to ½ inch. Tested in laboratory settings. Patent Pending for Products and Uses. DRY TIME Depending on temperature, humidity and thickness of application, Flood Paste will dry to the touch in approximately 2-6 hours, and fully cure in approximately 24-48 hours. Allow product to fully cure before floodwaters arrive. Flood Paste begins to cure when exposed to the air. Remove any dried material and always use fresh material to seal an opening. COVERAGE Cartridge Flood Protection Cartridge (9oz): A 1/4" inch bead will cover approximately 21 linear feet. Flood Protection Cartridge (28oz): A 1/4" inch bead will cover approximately 62 linear feet. Wrapped Sleeve The coverage one coat of the (3) 8.75oz individually wrapped sleeves of Flood Protection Paste, when applied 2 inches wide, is approximately 31 linear feet. The coverage one coat of the (6) 8.75oz individually wrapped sleeves of Flood Protection Paste, when applied 2 inches wide, is approximately 62 linear feet. IMPORTANT INFORMATION Always follow state and local weather advisories and evacuation orders. Depending on age and type of construction, there may be areas that cannot be seen or sealed. Unsealed porous surfaces may seep water during extended underwater exposure. Our Flood Protection Products are NOT intended for flash floods, extreme winds or water pressure, to protect against flying or floating debris, or if there is structural damage to the building. ADDITIONAL INFO All of our Flood Protection products are Patent Pending for both products and uses. Made in the USA with globally sourced materials. Color of product is high-visibility yellow. For more information on UL testing, click here.