Orange Siser EasyWeed HTV 59" / Heat Transfer Vinyl / Siser EasyWeed

Orange Siser EasyWeed 59"  Siser EasyWeed is now available in 59" width! Perfect for all your large and small projects! Siser EasyWeed Heat Transfer Vinyl is a polyurethane film that is a ready-to-cut vinyl for custom garment decoration. With Siser Easyweed, it is actually a heat transfer film since it has no adhesive backing. EasyWeed is adhered to any garment of your choice by a heat press. EasyWeed is thinner than other heat transfer vinyl which also offers a quick one-second tack application which is great for layering! EasyWeed can be cut with laser cutting systems. EasyWeed is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. Here are some of the outstanding features of Siser EasyWeed which include:  Peel hot or cold Can layer Semi-gloss finish  Can be used with a Laser Cutter 90 microns/3.5 Mils Thick Presses at a low temp with low pressure Will not adhere to nylon Due to the manufacturing process, material may vary in width by 1/8-1/4" Composition: PU CPSIA Certified Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment. We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended. 1. Offset: 0 2. Speed: 25 cm/s 3. Acceleration: 4 4. Cut Force: 16 *HTW uses a 45 Degree Blade Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)